1|Page
Building Maintenance final Questions and Answers with 100%
Complete Solutions UPDATED!!!
______ work is repair of a known problem before a breakdown
occurs.
Corrective
Visual and ____ inspection is the analysis of the appearance
and sound of operating equipment.
Auditory
A(n) ______ chart is a diagram that shows a logical sequence of
troubleshooting steps for a given set of conditions.
Flow
__________ maintenance is work that is planned and
scheduled for completion.
Scheduled
______ control is the organization and management of
commonly used parts, vendors, supplies and purchasing records
in the preventive maintenance system."
Inventory
,2|Page
Electronic files are more popular for storing maintenance
information, because they are easier to store, access and
organize.
True
____ monitoring is unscheduled monitoring as required.
Random
A(n) ____ is a book or electronic file that documents all work
performed during a shift and lists information needed to
complete work by maintenance technicians on other shifts.
log book
____ skills are strategies and actions that allow a person to
communicate effectively with other persons in a variety of
situations.
Interpersonal
Vibration frequency is most commonly expressed in ____.
CPM
____ would be considered a change in velocity
Acceleration
Project work may include rebuilding or modifying equipment.
True
,3|Page
"A(n) ____ is the failure of a system, equipment or part to
operate properly."
Malfunction
____ analysis is analysis that uses high vibration frequencies to
create an image or reading for analysis.
Ultrasonic
A(n) ______ order is a document that details work required to
complete specific maintenance tasks
Work
___ ___ is emergency care given to an injured individual before
medical assistance is available.
First Aid
A fume is a ___ from volatilized solids that condenses in cool air.
Vapor
"A material ____ sheet is printed material used to relay
chemical hazard information from the manufacturer, importer,
or distributor to the employer."
Safety Data
"____ is the use of locks, chains, or other physical restraints to
positively prevent the operation od specific equipment."
Lockout
, 4|Page
A ____ type of fire extinguisher should be used on electrical
equipment.
C
Which of these must an employer do to meet the Lockout/Tag-
out compliance. "Mark All That Apply"
a. Provide proper materials and hardware
c. Conduct annual Lockout/Tag-out inspections
d. Provide lockout Tag out training procedures
Class D fires are not as common as Class A fires.
True
Personal ____ equipment is clothing and/ or equipment worn
by a worker to prevent injury.
Protective
A ____ type of fire extinguisher should be used on flammable
liquids.
B
A ____ hazard on the NFPA Hazard Signal System is the degree
of susceptibility of materials to explode or release energy by
themselves or by exposure to certain conditions or substances.
Reactivity
Building Maintenance final Questions and Answers with 100%
Complete Solutions UPDATED!!!
______ work is repair of a known problem before a breakdown
occurs.
Corrective
Visual and ____ inspection is the analysis of the appearance
and sound of operating equipment.
Auditory
A(n) ______ chart is a diagram that shows a logical sequence of
troubleshooting steps for a given set of conditions.
Flow
__________ maintenance is work that is planned and
scheduled for completion.
Scheduled
______ control is the organization and management of
commonly used parts, vendors, supplies and purchasing records
in the preventive maintenance system."
Inventory
,2|Page
Electronic files are more popular for storing maintenance
information, because they are easier to store, access and
organize.
True
____ monitoring is unscheduled monitoring as required.
Random
A(n) ____ is a book or electronic file that documents all work
performed during a shift and lists information needed to
complete work by maintenance technicians on other shifts.
log book
____ skills are strategies and actions that allow a person to
communicate effectively with other persons in a variety of
situations.
Interpersonal
Vibration frequency is most commonly expressed in ____.
CPM
____ would be considered a change in velocity
Acceleration
Project work may include rebuilding or modifying equipment.
True
,3|Page
"A(n) ____ is the failure of a system, equipment or part to
operate properly."
Malfunction
____ analysis is analysis that uses high vibration frequencies to
create an image or reading for analysis.
Ultrasonic
A(n) ______ order is a document that details work required to
complete specific maintenance tasks
Work
___ ___ is emergency care given to an injured individual before
medical assistance is available.
First Aid
A fume is a ___ from volatilized solids that condenses in cool air.
Vapor
"A material ____ sheet is printed material used to relay
chemical hazard information from the manufacturer, importer,
or distributor to the employer."
Safety Data
"____ is the use of locks, chains, or other physical restraints to
positively prevent the operation od specific equipment."
Lockout
, 4|Page
A ____ type of fire extinguisher should be used on electrical
equipment.
C
Which of these must an employer do to meet the Lockout/Tag-
out compliance. "Mark All That Apply"
a. Provide proper materials and hardware
c. Conduct annual Lockout/Tag-out inspections
d. Provide lockout Tag out training procedures
Class D fires are not as common as Class A fires.
True
Personal ____ equipment is clothing and/ or equipment worn
by a worker to prevent injury.
Protective
A ____ type of fire extinguisher should be used on flammable
liquids.
B
A ____ hazard on the NFPA Hazard Signal System is the degree
of susceptibility of materials to explode or release energy by
themselves or by exposure to certain conditions or substances.
Reactivity
