AET1 SWE Questions with Detailed Verified Answers

|1


AET1 SWE Questions with Detailed Verified
Answers

Question: How are terminal lugs placed on a stud?

Ans ✅ ✅: Largest on bottom

Question: What Manual is the M11000.11?

Ans ✅ ✅: Coast Guard Civil Engineering Manual

Question: How many grounds can be connected to a ground terminal?

Ans ✅ ✅: No more than 4 (NavAir 01-1A-505-1 01700 pg 4)

Question: PG 85-00-10

Ans ✅ ✅: ACMS Process Guide

Question: What frequency will be most absorbed by the human body?

Ans ✅ ✅: 30-300 MHz (M10550.25A 4.1.10.2.3)

Question: What Manual is the M13001.1?

Ans ✅ ✅: USCG Aviation Fuel Handling Procedures Manual

Question: The CG lowered the UHF frequency range from 300MHz to
what?

Ans ✅ ✅: 225 MHz

Question: PG 85-00-20

Ans ✅ ✅: CG-22 Process Guide

Question: What is the most dangerous thing about a strobe light?

, |2
Ans ✅ ✅: High AC voltage- 3 minutes to discharge capacitor before handling (CGTO
1C-130H-2-33GS-00-1)

Question: What Manual is the M13020.1?

Ans ✅ ✅: Aeronautical Engineering Maintenance Management Manual

Question: What would make a strobe light fail prematurely?

Ans ✅ ✅: ???

Question: PG 85-00-30

Ans ✅ ✅: Reliability Centered Maintenance Process Guide

Question: What is the color of the plastic tool for extracting a pin?

Ans ✅ ✅: White

Question: What Manual is the M3710.1?

Ans ✅ ✅: Coast Guard Air Operations Manual

Question: What is the max pressure that should be attached to the
HT9000 nitrigen heat gun?

Ans ✅ ✅: 200 psi or 5 to 7 psi for normal operating (NavAir 505-1 1200 pg 5)

Question: PG 85-00-45

Ans ✅ ✅: TCTO Process Guide

Question: Whose responsibility is it to purchase general test bench
equipment?

Ans ✅ ✅: Procurement of General Purpose Electronics Test Equipment used
primarily for station maintenance and all specialized Electronics Test Equipment for
other than avionics use is a MLC or district responsibility (COMDTINST M13020.1F
Ch8.E.2.e)

Question: What Manual is the M5100.47?

, |3
Ans ✅ ✅: CG Safety and Environmental Health Manual

Question: To prevent a spark what lead should you put on last?

Ans ✅ ✅: Negative- ON: positive then negative OFF: negative then positive

(COMDTINST N10550.25A PG 4.1-33)

Question: PG 85-00-50

Ans ✅ ✅: TIMOS Process Guide

Question: How do you neutralize NiCad battery acid?

Ans ✅ ✅: 3% solution of acetic acid vinegar lemon juice or a 10% solution of Boric
acid

(TO 1H65A-11-243200 pg 6)

Question: What are the types of NMC (Not Mission Capable) according to
the M13020 which are factored into the NMCT (Not Mission Capable
Total)

Ans ✅ ✅: NMCM (Not Mission Capable due to Maintenance)

NMCS (Not Mission Capable due to Supply)

NMCD (Not Mission Capable due to Depot Level Maintenance at the Unit)

Question: PG 85-00—60

Ans ✅ ✅: Corrosion Control Process Guide

Question: Electrolyte used in a Nickel Cadium battery is?

Ans ✅ ✅: 30% Potassium Hydroxide: 70% Water

Question: What would be a suitable storage place for lead-acid
batteries?