1|Page
Maintenance Management Exam 1 Questions and Answers
with 100% Complete Solutions UPDATED!!!
Which of the following is not a knowledge requirement for
completion of the A&P certification?
- general aviation course
- airframe course
- servicing course
- power plant course
servicing course
Of the transportation modes, which industry is the most heavily
regulated?
aviation
_____ issues Type and Airworthiness certificates
FAA's MIDO
A _____ certifies the aircraft design: engines, instruments,
systems etc.
type certificate
Which of the following is true about an operations
specifications document (Ops Specs)? It...
,2|Page
- Identifies maintenance and inspection program for the
particular model of aircraft
- Outlines type of route to be flown and airports to that will be
used
- Is tailored to each operation
(ALL OF THE ABOVE)
Which knowledge level course is optional for complete of the
A&P certification?
Avionics/FCC licensure course
To successfully complete an Airframe and/or Powerplant
certification, a technician must pass a
knowledge exam, oral exam, practical exam
The CQI concept in aviation
Seeks continuous quality improvement in aviation
A "certificate of public convenience and necessity" authorizes
the recipient to
Enter into commercial transportation
PART 121 airline operations are written to ensure that safety
requirements are met through the
Employment of sufficient, qualified management and personnel
, 3|Page
The practical work hours required to complete an A&P
certification are approximately ______ and take an estimated
_______ months to achieve.
1900, 24
_________ confirms that the aircraft has been inspected,
conforms with its type certificate, and is in airworthy condition.
Airworthiness certificate
An AC grants authorization to
Operate an aircraft in flight
What is an STC?
A certification issued to modify and aircraft from its original
design
What certificates are required for full aircraft certification?
Type, production, & airworthiness certificate
The two ways to obtain training and experience to become an
FAA-certificated Airframe and/or Powerplant Mechanic are OJT
and
academic training through an FAA-certificated AMTS (Part 147)
school
Type Certificate Data Sheet
identifies the capabilities and limitations of the aircraft.
Maintenance Management Exam 1 Questions and Answers
with 100% Complete Solutions UPDATED!!!
Which of the following is not a knowledge requirement for
completion of the A&P certification?
- general aviation course
- airframe course
- servicing course
- power plant course
servicing course
Of the transportation modes, which industry is the most heavily
regulated?
aviation
_____ issues Type and Airworthiness certificates
FAA's MIDO
A _____ certifies the aircraft design: engines, instruments,
systems etc.
type certificate
Which of the following is true about an operations
specifications document (Ops Specs)? It...
,2|Page
- Identifies maintenance and inspection program for the
particular model of aircraft
- Outlines type of route to be flown and airports to that will be
used
- Is tailored to each operation
(ALL OF THE ABOVE)
Which knowledge level course is optional for complete of the
A&P certification?
Avionics/FCC licensure course
To successfully complete an Airframe and/or Powerplant
certification, a technician must pass a
knowledge exam, oral exam, practical exam
The CQI concept in aviation
Seeks continuous quality improvement in aviation
A "certificate of public convenience and necessity" authorizes
the recipient to
Enter into commercial transportation
PART 121 airline operations are written to ensure that safety
requirements are met through the
Employment of sufficient, qualified management and personnel
, 3|Page
The practical work hours required to complete an A&P
certification are approximately ______ and take an estimated
_______ months to achieve.
1900, 24
_________ confirms that the aircraft has been inspected,
conforms with its type certificate, and is in airworthy condition.
Airworthiness certificate
An AC grants authorization to
Operate an aircraft in flight
What is an STC?
A certification issued to modify and aircraft from its original
design
What certificates are required for full aircraft certification?
Type, production, & airworthiness certificate
The two ways to obtain training and experience to become an
FAA-certificated Airframe and/or Powerplant Mechanic are OJT
and
academic training through an FAA-certificated AMTS (Part 147)
school
Type Certificate Data Sheet
identifies the capabilities and limitations of the aircraft.
