RCO FINAL 2025 EXAM QUESTIONS WITH 100%
PASSED ANSWERS!!
What brake application will occur if the OCU is tilted and allowed to time out?
Answer - Emergency
2. When the secondary operator places the OCU into emergency, who must
perform the recovery procedure? Answer - both, sec then primary
When are remote control movements not considered shoving movements?
Answer - when riding the point
List the steps for recovering an emergency brake application. Answer - stop,
match, vigilance, recover
What speed must not be exceeded when using cameras to protect a road
crossing? When may speed be resumed? Answer - 4mph
List the steps for recovering a full service brake application. Answer - stop,
match , vigilance, release
What is the first RTO feature the operator tests when initially setting up a unit
for remote operation? Answer - tilt/attachment
, What would cause a clicking sound followed by a steady tone alarm? Answer -
tilt down for 5 secs
9. Which OCU component will allow the RCO to send an emergency stop
command to the RCL? Answer - ind
10. The RCO begins hearing a steady clicking sound from the OCU after
remaining in 7 mph for
50 seconds. How should the RCO respond? Answer - full app
What is the preferred method of slowing or stopping the movement? Answer -
ramp down
If the primary OCU fails, what would the other operator need to do in order to
continue working? Answer - restart.... unlink then relink
Using the OCU, how does the primary RCO initiate a pitch after completing a
job briefing? Answer - press the pitch button
How does the secondary RCO accept the pitch? Answer - pres the vig button
15. How many seconds does the secondary RCO have to accept the pitch?
Answer - 10 seconds
16. If the primary RCO sends a pitch in error, how could the primary RCO
prevent control from
ni/035
being transferred? Answer - don't except it
PASSED ANSWERS!!
What brake application will occur if the OCU is tilted and allowed to time out?
Answer - Emergency
2. When the secondary operator places the OCU into emergency, who must
perform the recovery procedure? Answer - both, sec then primary
When are remote control movements not considered shoving movements?
Answer - when riding the point
List the steps for recovering an emergency brake application. Answer - stop,
match, vigilance, recover
What speed must not be exceeded when using cameras to protect a road
crossing? When may speed be resumed? Answer - 4mph
List the steps for recovering a full service brake application. Answer - stop,
match , vigilance, release
What is the first RTO feature the operator tests when initially setting up a unit
for remote operation? Answer - tilt/attachment
, What would cause a clicking sound followed by a steady tone alarm? Answer -
tilt down for 5 secs
9. Which OCU component will allow the RCO to send an emergency stop
command to the RCL? Answer - ind
10. The RCO begins hearing a steady clicking sound from the OCU after
remaining in 7 mph for
50 seconds. How should the RCO respond? Answer - full app
What is the preferred method of slowing or stopping the movement? Answer -
ramp down
If the primary OCU fails, what would the other operator need to do in order to
continue working? Answer - restart.... unlink then relink
Using the OCU, how does the primary RCO initiate a pitch after completing a
job briefing? Answer - press the pitch button
How does the secondary RCO accept the pitch? Answer - pres the vig button
15. How many seconds does the secondary RCO have to accept the pitch?
Answer - 10 seconds
16. If the primary RCO sends a pitch in error, how could the primary RCO
prevent control from
ni/035
being transferred? Answer - don't except it
