CWB 47.1
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company
seeking certification.
True or False? - ✔✔ correct answer True
Certification can be considered as an approval of the products fabricated by a certificated company?
True or false?! - ✔✔ correct answer False
What does "class" refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies - ✔✔ correct answer C
What does classification refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies - ✔✔ correct answer A
What organization administer CSA Standard W47.1
A) there is no administrator
B) Canadian standards association
C) Canadian welding bureau - ✔✔ correct answer C
The Canadian welding bureau can withdraw a company's certification if the company is NOT
following the requirements of CSA standard W47.1
True or false ? - ✔✔ correct answer True
How many divisions of certification are specified in CSA Standard W47.1 ?
A) one
B) two
, CWB 47.1
C) three
D) four - ✔✔ correct answer C
Is a company certified in division 1 required to employ a full time or retain a part time welding
engineer?
A) retain a part time welding engineer
B) employ a full time welding engineer
C) no engineer is required
D) employ a full time welding inspector only - ✔✔ correct answer B
Is a company certified in division 3 required to employ a full time or retain a part time welding
engineer?
A) Employ a full time welding engineer
B) Retain a part time welding engineer
C) retain a part time welding engineer responsible to the company only for welding procedures and
practice
D) No welding engineer is required - ✔✔ correct answer D
CSA Standard W47.1 requires each designated plant, shop or section to meet the requirements of
certification within this standard with respect to welders, welding procedures specification, welding
procedure data sheets, welding supervisor and welding engineer, where applicable
True or false? - ✔✔ correct answer True
A company doing only erection work involving welding must have a pony in order to be certified to
CSA standard W47.1
True or false? - ✔✔ correct answer False
When must the company inform the Canadian bureau of any loss or change in welding engineering
or supervisory personnel?
A) immediately
B) after 3 months
C) after 6 months
D) the doesn't have to inform as long as the personnel is replaced after a year - ✔✔ correct answer A
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company
seeking certification.
True or False? - ✔✔ correct answer True
Certification can be considered as an approval of the products fabricated by a certificated company?
True or false?! - ✔✔ correct answer False
What does "class" refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies - ✔✔ correct answer C
What does classification refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies - ✔✔ correct answer A
What organization administer CSA Standard W47.1
A) there is no administrator
B) Canadian standards association
C) Canadian welding bureau - ✔✔ correct answer C
The Canadian welding bureau can withdraw a company's certification if the company is NOT
following the requirements of CSA standard W47.1
True or false ? - ✔✔ correct answer True
How many divisions of certification are specified in CSA Standard W47.1 ?
A) one
B) two
, CWB 47.1
C) three
D) four - ✔✔ correct answer C
Is a company certified in division 1 required to employ a full time or retain a part time welding
engineer?
A) retain a part time welding engineer
B) employ a full time welding engineer
C) no engineer is required
D) employ a full time welding inspector only - ✔✔ correct answer B
Is a company certified in division 3 required to employ a full time or retain a part time welding
engineer?
A) Employ a full time welding engineer
B) Retain a part time welding engineer
C) retain a part time welding engineer responsible to the company only for welding procedures and
practice
D) No welding engineer is required - ✔✔ correct answer D
CSA Standard W47.1 requires each designated plant, shop or section to meet the requirements of
certification within this standard with respect to welders, welding procedures specification, welding
procedure data sheets, welding supervisor and welding engineer, where applicable
True or false? - ✔✔ correct answer True
A company doing only erection work involving welding must have a pony in order to be certified to
CSA standard W47.1
True or false? - ✔✔ correct answer False
When must the company inform the Canadian bureau of any loss or change in welding engineering
or supervisory personnel?
A) immediately
B) after 3 months
C) after 6 months
D) the doesn't have to inform as long as the personnel is replaced after a year - ✔✔ correct answer A
