Gas Fitter test questions well answered already passed

Gas Fitter test questions well answered already
passed
1. A Class A Gas
entitles the holder to perform the installation or alteration of any gas system,
Fit- ter
except vehicle fuel systems, under an appropriate permit
Certificate of
Qualification
an appliance with an input of 120 kW or less that displays a label or mark
2. A Class B Gas
as follows:
Fit- ter
a certification mark;
Certificate of
an approval mark issued under section 10 of the Act;
Qualification
Piping and vents

Except as otherwise provided under this Act a safety oflcer is not
required to inspect regulated work or a regulated product solely because
3. Discretion
a permit was issued in respect of the regulated work or regulated
whether to
product.
inspect after
issue of
permit

4. Directives (a) generally,
(b) for a specific regulated product or class of regulated products,
(c) for specific regulated work or class of regulated work,
(d) for a class of persons, or
(e) for or in relation to a specified period of time.

5. Safety orders To prevent, avoid or reduce risk of personal injury or damage to property,
a
provincial safety manager may, in writing, issue a safety order.
(2) A safety order may be issued to any person in relation to any of
the following:
(a) regulated work or regulated products generally;
(b) a specific class of regulated product or regulated work;
(c) a specific regulated product or regulated work.


,Gas Fitter test questions well answered already
passed
(3) For certainty, a safety order issued under this section may apply
to
(a) regulated work that meets the requirements under this Act,
(b) regulated work that previously met the requirements under this Act
or a former Act but does not meet the current requirements under this
Act,
(c) regulated products that meet the requirements under this Act, or






, Gas Fitter test questions well answered already
passed
(d) regulated products that previously met the requirements under
this Act or a former Act but do not meet the current requirements
under this Act, including a regulated product that bears a certification
mark.
(4) A safety order may specify any requirement that is intended to
prevent, avoid or reduce the risk of personal injury or damage to
property and may include any of the following orders:
(a) that an existing regulated work or regulated product must
be made safe in compliance with the safety order;
(b) that a regulated product must be
(i) disconnected from a power source,
(ii) uninstalled, or
(iii) modified before continued use;
(c) that a regulated product must be operated, installed,
manufactured or dis- posed of only as specified or that a regulated
product must not be moved;
(d) that current or future regulated work or a regulated product
must conform to the terms or conditions of the order;
(e) that a person take or refrain from taking any action that a
safety manager considers necessary to prevent, avoid or reduce a risk of
personal injury to persons or damage to property;
(f) that

6. Variances (1) A safety oflcer may, if requested by any person, issue, in writing, a
variance to the person varying the application of a provision of the
regulations with respect to a regulated product or regulated work.
(2) A variance may
(a) be made subject to terms and conditions specified by the safety
oflcer, and
(b) continue for a specified period of time.
(3) If the person who holds a variance complies with the terms