AVIXA CTS EXAM WITH ALL CORRECT & 100%
VERIFIED ANSWERS|ALREADY GRADED A+
what would be the volume of a room that measures 7 meters long by 6 meters wide and 3 meters
high ✔Correct answer-126 meters = 7*6*3
What would a mechanical drawing be used for? ✔Correct answer-location of heating , plumbing
and ventilation in a venue
How is the volume of a space calculated ✔Correct answer-Length times width times hight
What is the most important in formation to be gathered on a site visit ✔Correct answer-room size
and layout
When conducting a site visit if a ladder is needed what type of ladder should be used and why?
✔Correct answer-fiberglass or wood in case a surface might be electrified
A scale drawing unit of 1/1:20 signifies what type of scale-drawing measurement? ✔Correct
answer-a common metric scale
When considering customer constraints for ___, the signal type, distance from viewers, aspect ratio
and source resolution are all limiting factors. ✔Correct answer-image display
When documenting requirements for network services, a formal technical document called a(n)
_______ is often utilized. ✔Correct answer-SLA( service level agreement)
One major difference between the Service Level Agreement process and the traditional Program
Report is the SLA focuses upon ✔Correct answer-Measurement of service through monitoring
procedures
"When gathering and documenting site information and requirements for the overall functional
needs of an AV system, a document called the _____ is usually produced." ✔Correct answer-
program report
"When gathering and documenting site information and requirements for the overall functional
needs of an AV system, a document called the _____ is usually produced." ✔Correct answer-" Take
pictures for reference and note any potential conflicts or obstructions"
"When collecting information during a site survey, it is good practice to do which of the following?"
✔Correct answer-"Take pictures for reference and note any potential conflicts or obstructions"
"What are the primary sources of ambient noise within a room that is being used for AV
presentations?
" ✔Correct answer-" HVAC (mechanical) systems, projectors, displays and power amplifiers"
" If the displayed text size in a projected presentation is 3 inches (76 mm), then the viewer should
not be farther away than ___ for reading the text." ✔Correct answer-"450 inches (11,400 mm)"
VERIFIED ANSWERS|ALREADY GRADED A+
what would be the volume of a room that measures 7 meters long by 6 meters wide and 3 meters
high ✔Correct answer-126 meters = 7*6*3
What would a mechanical drawing be used for? ✔Correct answer-location of heating , plumbing
and ventilation in a venue
How is the volume of a space calculated ✔Correct answer-Length times width times hight
What is the most important in formation to be gathered on a site visit ✔Correct answer-room size
and layout
When conducting a site visit if a ladder is needed what type of ladder should be used and why?
✔Correct answer-fiberglass or wood in case a surface might be electrified
A scale drawing unit of 1/1:20 signifies what type of scale-drawing measurement? ✔Correct
answer-a common metric scale
When considering customer constraints for ___, the signal type, distance from viewers, aspect ratio
and source resolution are all limiting factors. ✔Correct answer-image display
When documenting requirements for network services, a formal technical document called a(n)
_______ is often utilized. ✔Correct answer-SLA( service level agreement)
One major difference between the Service Level Agreement process and the traditional Program
Report is the SLA focuses upon ✔Correct answer-Measurement of service through monitoring
procedures
"When gathering and documenting site information and requirements for the overall functional
needs of an AV system, a document called the _____ is usually produced." ✔Correct answer-
program report
"When gathering and documenting site information and requirements for the overall functional
needs of an AV system, a document called the _____ is usually produced." ✔Correct answer-" Take
pictures for reference and note any potential conflicts or obstructions"
"When collecting information during a site survey, it is good practice to do which of the following?"
✔Correct answer-"Take pictures for reference and note any potential conflicts or obstructions"
"What are the primary sources of ambient noise within a room that is being used for AV
presentations?
" ✔Correct answer-" HVAC (mechanical) systems, projectors, displays and power amplifiers"
" If the displayed text size in a projected presentation is 3 inches (76 mm), then the viewer should
not be farther away than ___ for reading the text." ✔Correct answer-"450 inches (11,400 mm)"
