BICSI Practice Test-RETAKE COMPLETE QUESTIONS
AND ANSWERS | ALREADY PASSED | 2025 LATEST!!
The 2 main considerations concerning the existing cabling are? -
(ANSWER)Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another
until completed is called a - (ANSWER)rolling cut 11-28
Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space? - (ANSWER)Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light? - (ANSWER)Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed
out? - (ANSWER)CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. -
(ANSWER)Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the
other end. - (ANSWER)Light source and power meter
,A ________ detects the presence of light within a fiber strand - (ANSWER)Fiber
strand identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end. - (ANSWER)Visual fault locator
A________ will leave the customer momentarily without communications -
(ANSWER)Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until
completed. - (ANSWER)Rolling cut
*_________ is a property of an electromagnetic field built around a conductor
that opposes any changes in current flow in a circuit. - (ANSWER)Inductance
____________ is a property of conductors that allows storage of electrical
charges when potential differences (voltages) exist between the conductors. -
(ANSWER)Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms. - (ANSWER)Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz - (ANSWER)100
, Pair 626 would be in the __________ Super Binder - (ANSWER)Red
Series ______ is the preferred choice for longer runs - (ANSWER)11
The _________ connector/s have center pins (choose all that apply) - (ANSWER)N
BNC
The way in which others perceive an employee can be divided into 3 distinct
areas: body language, Tone of voice and choice of words. Which of the 3 makes
the biggest impression? - (ANSWER)Body language - 55%
The range of human hearing is from _________ - (ANSWER)20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. -
(ANSWER)3 dB
Increases or decreases of ________ for voltage will cause an increase or decrease
of 10 times the original value. - (ANSWER)6 dB
The code stands for "flush-or surface-mounted jack" - (ANSWER)C
A "push to talk" intercom system would be an example of a ______ transmission
method. - (ANSWER)half-duplex 1-1
AND ANSWERS | ALREADY PASSED | 2025 LATEST!!
The 2 main considerations concerning the existing cabling are? -
(ANSWER)Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another
until completed is called a - (ANSWER)rolling cut 11-28
Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space? - (ANSWER)Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light? - (ANSWER)Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed
out? - (ANSWER)CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. -
(ANSWER)Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the
other end. - (ANSWER)Light source and power meter
,A ________ detects the presence of light within a fiber strand - (ANSWER)Fiber
strand identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end. - (ANSWER)Visual fault locator
A________ will leave the customer momentarily without communications -
(ANSWER)Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until
completed. - (ANSWER)Rolling cut
*_________ is a property of an electromagnetic field built around a conductor
that opposes any changes in current flow in a circuit. - (ANSWER)Inductance
____________ is a property of conductors that allows storage of electrical
charges when potential differences (voltages) exist between the conductors. -
(ANSWER)Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms. - (ANSWER)Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz - (ANSWER)100
, Pair 626 would be in the __________ Super Binder - (ANSWER)Red
Series ______ is the preferred choice for longer runs - (ANSWER)11
The _________ connector/s have center pins (choose all that apply) - (ANSWER)N
BNC
The way in which others perceive an employee can be divided into 3 distinct
areas: body language, Tone of voice and choice of words. Which of the 3 makes
the biggest impression? - (ANSWER)Body language - 55%
The range of human hearing is from _________ - (ANSWER)20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. -
(ANSWER)3 dB
Increases or decreases of ________ for voltage will cause an increase or decrease
of 10 times the original value. - (ANSWER)6 dB
The code stands for "flush-or surface-mounted jack" - (ANSWER)C
A "push to talk" intercom system would be an example of a ______ transmission
method. - (ANSWER)half-duplex 1-1
