CIST 1122 - Final Exam Study Guide Exam Questions
with Correct Answers Latest Update 2025
The keyboard is the primary input device of a computer. - ANSWER ✔✔- True
The _____ is the primary input device of a computer. - ANSWER ✔✔- Keyboard
True or False: A circuit board is a board that holds microchips, or integrated
circuits (ICs), and the circuitry that connects these chips. - ANSWER ✔✔- False
A(n)________ is a board that holds microchips, or integrated circuits (ICs), and the
circuitry that connects these chips. - ANSWER ✔✔- adapter card
True or False: Disk is a temporary place to hold instructions and data while the
CPU processes both. - ANSWER ✔✔- False
________ is a temporary place to hold instructions and data while the CPU
processes both. (pg 10) - ANSWER ✔✔- Memory
True or False: The part of the bus we are most familiar with are the paths, or lines,
of the bus used to move data, called the data bus. - ANSWER ✔✔- True
The part of the bus we are most familiar with are the paths, or lines, of the bus used
to move data, called the ____ _____. - ANSWER ✔✔- Data bus
1|Page
,True or False: A power supply receives 110-120 volts of AC power from a wall
outlet and converts it to a much lower AC voltage. - ANSWER ✔✔- False
A power supply receives 110-120 volts of AC power from a wall outlet and
converts it to a much lower ___ voltage. - ANSWER ✔✔- DC
True or False: A jumper is open if the cover is not in place. - ANSWER ✔✔- True
A jumper is _____ if the cover is not in place. - ANSWER ✔✔- open
True or False: The easiest way to identify an expansion card is to look at the label
on back of the case. - ANSWER ✔✔- False
The easiest way to identify an expansion card is to look at the ____ on back of the
case. - ANSWER ✔✔- ports
True or False: A group of switches is sometimes used to tell the system at what
speed the CPU is running, or to turn a power saving feature on or off. - ANSWER
✔✔- False
A group of _____ are sometimes used to tell the system at what speed the CPU is
running, or to turn a power saving feature on or off. - ANSWER ✔✔- jumpers
True or False: The most common personal computers (PCs) are referred to as IBM
compatible. - ANSWER ✔✔- True
2|Page
,The most common personal computers (PCs) are referred to as ____ compatible. -
ANSWER ✔✔- IBM
True or False: The most common types of boards that hold memory chips are
called SIMMs, DIMMs, and PIMMs. - ANSWER ✔✔- False
The most common types of boards that hold memory chips are called SIMMs,
DIMMs, and ____. - ANSWER ✔✔- RIMMs
True or False: BIOSs are small programs stored on the hard drive that tell the
computer how to communicate with a specific hardware device such as a printer,
network card , or modem. - ANSWER ✔✔- False
____ are small programs stored on the hard drive that tell the computer how to
communicate with a specific hardware device such as a printer, network card , or
modem. - ANSWER ✔✔- Device Drivers
True or False: A hard boot involves using the operating system to reboot. -
ANSWER ✔✔- False
A _____ ____ involves using the operating system to reboot. - ANSWER ✔✔- soft
boot
True or False: An operating system uses BIOS or device drivers to manage
hardware devices. - ANSWER ✔✔- True
A(n) _____ _____ uses BIOS or device drivers to manage hardware devices. -
ANSWER ✔✔- operating system
3|Page
, True or False: I/O addresses are communicated on the address bus. - ANSWER
✔✔- True
___ ______ are communicated on the address bus. - ANSWER ✔✔- I/O addresses
True or False: Alternating current travels in only one direction and is a type of
current that most electronic devices require. - ANSWER ✔✔- False
________ ________ travels in only one direction and is a type of current that most
electronic devices require. (pg.47) - ANSWER ✔✔- Direct current
True or False: A short circuit occurs when uncontrolled electricity flows from the
hot line to the neutral line or from the hot line to ground. - ANSWER ✔✔- True
A _____ _____ occurs when uncontrolled electricity flows from the hot line to the
neutral line or from the hot line to ground. - ANSWER ✔✔- short circuit
True or False: A resister is the basic building block of an integrated circuit (IC),
which is used to build a microchip. - ANSWER ✔✔- False
A ____ is the basic building block of an integrated circuit (IC), which is used to
build a microchip. - ANSWER ✔✔- transistor
True or False: Power supplies designed for the Baby AT form factor blow dust out
of the computer case. - ANSWER ✔✔- False
4|Page
with Correct Answers Latest Update 2025
The keyboard is the primary input device of a computer. - ANSWER ✔✔- True
The _____ is the primary input device of a computer. - ANSWER ✔✔- Keyboard
True or False: A circuit board is a board that holds microchips, or integrated
circuits (ICs), and the circuitry that connects these chips. - ANSWER ✔✔- False
A(n)________ is a board that holds microchips, or integrated circuits (ICs), and the
circuitry that connects these chips. - ANSWER ✔✔- adapter card
True or False: Disk is a temporary place to hold instructions and data while the
CPU processes both. - ANSWER ✔✔- False
________ is a temporary place to hold instructions and data while the CPU
processes both. (pg 10) - ANSWER ✔✔- Memory
True or False: The part of the bus we are most familiar with are the paths, or lines,
of the bus used to move data, called the data bus. - ANSWER ✔✔- True
The part of the bus we are most familiar with are the paths, or lines, of the bus used
to move data, called the ____ _____. - ANSWER ✔✔- Data bus
1|Page
,True or False: A power supply receives 110-120 volts of AC power from a wall
outlet and converts it to a much lower AC voltage. - ANSWER ✔✔- False
A power supply receives 110-120 volts of AC power from a wall outlet and
converts it to a much lower ___ voltage. - ANSWER ✔✔- DC
True or False: A jumper is open if the cover is not in place. - ANSWER ✔✔- True
A jumper is _____ if the cover is not in place. - ANSWER ✔✔- open
True or False: The easiest way to identify an expansion card is to look at the label
on back of the case. - ANSWER ✔✔- False
The easiest way to identify an expansion card is to look at the ____ on back of the
case. - ANSWER ✔✔- ports
True or False: A group of switches is sometimes used to tell the system at what
speed the CPU is running, or to turn a power saving feature on or off. - ANSWER
✔✔- False
A group of _____ are sometimes used to tell the system at what speed the CPU is
running, or to turn a power saving feature on or off. - ANSWER ✔✔- jumpers
True or False: The most common personal computers (PCs) are referred to as IBM
compatible. - ANSWER ✔✔- True
2|Page
,The most common personal computers (PCs) are referred to as ____ compatible. -
ANSWER ✔✔- IBM
True or False: The most common types of boards that hold memory chips are
called SIMMs, DIMMs, and PIMMs. - ANSWER ✔✔- False
The most common types of boards that hold memory chips are called SIMMs,
DIMMs, and ____. - ANSWER ✔✔- RIMMs
True or False: BIOSs are small programs stored on the hard drive that tell the
computer how to communicate with a specific hardware device such as a printer,
network card , or modem. - ANSWER ✔✔- False
____ are small programs stored on the hard drive that tell the computer how to
communicate with a specific hardware device such as a printer, network card , or
modem. - ANSWER ✔✔- Device Drivers
True or False: A hard boot involves using the operating system to reboot. -
ANSWER ✔✔- False
A _____ ____ involves using the operating system to reboot. - ANSWER ✔✔- soft
boot
True or False: An operating system uses BIOS or device drivers to manage
hardware devices. - ANSWER ✔✔- True
A(n) _____ _____ uses BIOS or device drivers to manage hardware devices. -
ANSWER ✔✔- operating system
3|Page
, True or False: I/O addresses are communicated on the address bus. - ANSWER
✔✔- True
___ ______ are communicated on the address bus. - ANSWER ✔✔- I/O addresses
True or False: Alternating current travels in only one direction and is a type of
current that most electronic devices require. - ANSWER ✔✔- False
________ ________ travels in only one direction and is a type of current that most
electronic devices require. (pg.47) - ANSWER ✔✔- Direct current
True or False: A short circuit occurs when uncontrolled electricity flows from the
hot line to the neutral line or from the hot line to ground. - ANSWER ✔✔- True
A _____ _____ occurs when uncontrolled electricity flows from the hot line to the
neutral line or from the hot line to ground. - ANSWER ✔✔- short circuit
True or False: A resister is the basic building block of an integrated circuit (IC),
which is used to build a microchip. - ANSWER ✔✔- False
A ____ is the basic building block of an integrated circuit (IC), which is used to
build a microchip. - ANSWER ✔✔- transistor
True or False: Power supplies designed for the Baby AT form factor blow dust out
of the computer case. - ANSWER ✔✔- False
4|Page
