NEIEP 800 final Review / Complete Study Guide /
Actual Exam Questions and Correct Answers (Verified,
Detailed Answers) A Grade
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50
square inches. What is the system pressure? - (ANSWER)162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-
wellway distance? - (ANSWER)134' 11"
Electrolysis is caused by which of the following? - (ANSWER)Stray current
corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must be how many times the
diameter of the suspension ropes? - (ANSWER)30
Wye-Delta starting is used for which of the following? - (ANSWER)Reduced
current starting
You need the area of the plunger to calculate the pressure of the hydraulic
system. Your plunger is 8 inches in diameter. What is it's area? - (ANSWER)50.27
square inches
Which of the following provides mechanical interlocking of contactors? -
(ANSWER)Interlock contacts
, As the certified welder on the job you must weld two cylinder pieces. How must
you join the two pieces? - (ANSWER)Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to
prevent damage to the packing? - (ANSWER)Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound? -
(ANSWER)When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance from
the first floor finished floor height and the second floor finished floor height? -
(ANSWER)13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct
measurement to align the truss in the center of the wellway? - (ANSWER)7' 6
1/2"
What is the function of the lower newel wheel on a moving walk with solid
balustrades? - (ANSWER)It acts as an idler
Which of the following will determine the leveling speed of an elevator? -
(ANSWER)Rate of flow in gpm
Which of the following best describes the rack and pinion drive motor brake? -
(ANSWER)It is spring set and electrically released
Actual Exam Questions and Correct Answers (Verified,
Detailed Answers) A Grade
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50
square inches. What is the system pressure? - (ANSWER)162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-
wellway distance? - (ANSWER)134' 11"
Electrolysis is caused by which of the following? - (ANSWER)Stray current
corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must be how many times the
diameter of the suspension ropes? - (ANSWER)30
Wye-Delta starting is used for which of the following? - (ANSWER)Reduced
current starting
You need the area of the plunger to calculate the pressure of the hydraulic
system. Your plunger is 8 inches in diameter. What is it's area? - (ANSWER)50.27
square inches
Which of the following provides mechanical interlocking of contactors? -
(ANSWER)Interlock contacts
, As the certified welder on the job you must weld two cylinder pieces. How must
you join the two pieces? - (ANSWER)Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to
prevent damage to the packing? - (ANSWER)Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound? -
(ANSWER)When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance from
the first floor finished floor height and the second floor finished floor height? -
(ANSWER)13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct
measurement to align the truss in the center of the wellway? - (ANSWER)7' 6
1/2"
What is the function of the lower newel wheel on a moving walk with solid
balustrades? - (ANSWER)It acts as an idler
Which of the following will determine the leveling speed of an elevator? -
(ANSWER)Rate of flow in gpm
Which of the following best describes the rack and pinion drive motor brake? -
(ANSWER)It is spring set and electrically released
