100 ELEVATOR FINAL EXAM / ACCURATE EXPERT
VERIFIED 150+ QUESTIONS & ANSWERS FOR
GUARANTEED PASS | NEWEST UPDATE,
Which of the following is a term used to describe a body harness used in
conjunction with a shock absorbing lanyard? - (ANSWER)Personal fall arrest
system
A mechanic is working on a construction job, and finds the carpenter using a
powder activated tool to anchor wall track. Of the following, which precaution
should the mechanic take? - (ANSWER)Wear hearing protection
Which is the best way to communicate with your coworkers while you are in the
machine room and they are working in the pit? - (ANSWER)Two-way radio
A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a
"strain". What type of Injury did they sustain? - (ANSWER)Muscle stretched
beyond limits
You are about to step to a car top. After activating the top of car stop switch and
the inspection switch, what is the next step to verify that they work? -
(ANSWER)Close the hoist way doors and set up a hall call
What safety device might you encounter in a hydraulic elevator pit? -
(ANSWER)Plunger gripper
,What is the most serious consequence of incorrect lifting? - (ANSWER)Spinal
injury
What is called the "silent killer" - (ANSWER)The counter weight
A mechanic needs to ride on the car top, but a top-of car operating device is not
available. What should the mechanic do? - (ANSWER)Establish communication
with a qualified person in the car
You are about to perform routine maintenance on an elevator. After applying a
lock and a tag, what step should you take? - (ANSWER)Verify no power with
appropriate test equipment
When does ASME A17.1 require a pit ladder to be installed? - (ANSWER)When pit
depth exceeds 35"
A mechanic is taking a trouble call in a dumbwaiter, and realizes he must stand on
the car top, what should the dumbwaiter be equipped with? - (ANSWER)Car
safeties
When working around electricity, which of the following safety precautions
should be followed? - (ANSWER)Remove jewelry and metal frames glasses
When are elevator constructors permitted to ride inside a 400lb. Capacity
dumbwaiter - (ANSWER)They are not permitted to ride inside any dumbwaiter
, Who is ultimately responsible for ensuring adequate lighting at a work site? -
(ANSWER)You
Your mechanic asks you to perform a job site inspection and you find a serious
OSHA violation. Who would you notify first? - (ANSWER)Your mechanic
What are the two most common causes of accidents to members of the general
public on elevators? - (ANSWER)Trips and falls, and being struck by the doors
Before shortening a governor rope, what safety steps should be taken? -
(ANSWER)LOTO and support tension sheave
You aren't sure if a particular hoistway is considered a permit-required confined
space. Where can you find more information? - (ANSWER)OSHA 29 CFR 1926
code
You arrive at the machine room to replace a thrust bearing and find the lights are
not working. What should you do? - (ANSWER)Do not start work until the lighting
is restored
After locking out and tagging out the electrical system, what safety step must be
taken before entering an escalator truss? - (ANSWER)Install a mechanical lock
VERIFIED 150+ QUESTIONS & ANSWERS FOR
GUARANTEED PASS | NEWEST UPDATE,
Which of the following is a term used to describe a body harness used in
conjunction with a shock absorbing lanyard? - (ANSWER)Personal fall arrest
system
A mechanic is working on a construction job, and finds the carpenter using a
powder activated tool to anchor wall track. Of the following, which precaution
should the mechanic take? - (ANSWER)Wear hearing protection
Which is the best way to communicate with your coworkers while you are in the
machine room and they are working in the pit? - (ANSWER)Two-way radio
A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a
"strain". What type of Injury did they sustain? - (ANSWER)Muscle stretched
beyond limits
You are about to step to a car top. After activating the top of car stop switch and
the inspection switch, what is the next step to verify that they work? -
(ANSWER)Close the hoist way doors and set up a hall call
What safety device might you encounter in a hydraulic elevator pit? -
(ANSWER)Plunger gripper
,What is the most serious consequence of incorrect lifting? - (ANSWER)Spinal
injury
What is called the "silent killer" - (ANSWER)The counter weight
A mechanic needs to ride on the car top, but a top-of car operating device is not
available. What should the mechanic do? - (ANSWER)Establish communication
with a qualified person in the car
You are about to perform routine maintenance on an elevator. After applying a
lock and a tag, what step should you take? - (ANSWER)Verify no power with
appropriate test equipment
When does ASME A17.1 require a pit ladder to be installed? - (ANSWER)When pit
depth exceeds 35"
A mechanic is taking a trouble call in a dumbwaiter, and realizes he must stand on
the car top, what should the dumbwaiter be equipped with? - (ANSWER)Car
safeties
When working around electricity, which of the following safety precautions
should be followed? - (ANSWER)Remove jewelry and metal frames glasses
When are elevator constructors permitted to ride inside a 400lb. Capacity
dumbwaiter - (ANSWER)They are not permitted to ride inside any dumbwaiter
, Who is ultimately responsible for ensuring adequate lighting at a work site? -
(ANSWER)You
Your mechanic asks you to perform a job site inspection and you find a serious
OSHA violation. Who would you notify first? - (ANSWER)Your mechanic
What are the two most common causes of accidents to members of the general
public on elevators? - (ANSWER)Trips and falls, and being struck by the doors
Before shortening a governor rope, what safety steps should be taken? -
(ANSWER)LOTO and support tension sheave
You aren't sure if a particular hoistway is considered a permit-required confined
space. Where can you find more information? - (ANSWER)OSHA 29 CFR 1926
code
You arrive at the machine room to replace a thrust bearing and find the lights are
not working. What should you do? - (ANSWER)Do not start work until the lighting
is restored
After locking out and tagging out the electrical system, what safety step must be
taken before entering an escalator truss? - (ANSWER)Install a mechanical lock
