Dante Level 2
A multicast subscription is made among two Dante devices. The latency value of the transmitter
and receiver are 0.25msec and zero.5msec, respectively. What is the resulting latency of this
stream? - ANS-1.0 msec
A unicast audio or video subscription: - ANS-IS the default conduct for Dante gadgets
A unicast subscription is made among Dante gadgets.
The latency cost of the transmitter and receiver are zero.25msec and 0.5msec, respectively.
What is the resulting latency of this circulation? - ANS-zero.Five msec
Approximately how a lot bandwidth does a unicast audio float use? (4-ch, 24-bit, 48kHz, 1msec
latency) - ANS-6Mbps
As a simple rule of thumb, how an awful lot latency need to be allowed per community transfer
hop? - ANS-zero.1 msec (a hundred microseconds)
Broadway I/Os - ANS-16x16
Brooklyn II I/Os - ANS-64x64
Can a Dante network with five transfer hops guide latency of one msec? - ANS-Yes. Minimum
advocated latency will be as little as zero.5 msec.
Dante AV I/Os - ANS-8x8
Dante Controller can follow records in a Dante preset to a device of a different model.
For example, if a 4-channel 70V amplifier is replaced with an 8-channel version, it can store the
IP settings,
device name, as well as channel labels and subscriptions for the primary 4 channels - ANS-True
Dante Controller can do not forget a part of a preset - only storing facts about a few settings
and/or proscribing which gadgets we want to recollect them on. - ANS-True
For Dante AV, as much as X video channel(s) and up to Y audio channel(s) are to be had.
The chipset can Z. - ANS-For Dante AV, up to [ 1 ] video channel(s) and as much as [ 8 ] audio
channel(s) are to be had.
The chipset may be configured as an input or output.
HC and IP Core I/Os - ANS-512x512
A multicast subscription is made among two Dante devices. The latency value of the transmitter
and receiver are 0.25msec and zero.5msec, respectively. What is the resulting latency of this
stream? - ANS-1.0 msec
A unicast audio or video subscription: - ANS-IS the default conduct for Dante gadgets
A unicast subscription is made among Dante gadgets.
The latency cost of the transmitter and receiver are zero.25msec and 0.5msec, respectively.
What is the resulting latency of this circulation? - ANS-zero.Five msec
Approximately how a lot bandwidth does a unicast audio float use? (4-ch, 24-bit, 48kHz, 1msec
latency) - ANS-6Mbps
As a simple rule of thumb, how an awful lot latency need to be allowed per community transfer
hop? - ANS-zero.1 msec (a hundred microseconds)
Broadway I/Os - ANS-16x16
Brooklyn II I/Os - ANS-64x64
Can a Dante network with five transfer hops guide latency of one msec? - ANS-Yes. Minimum
advocated latency will be as little as zero.5 msec.
Dante AV I/Os - ANS-8x8
Dante Controller can follow records in a Dante preset to a device of a different model.
For example, if a 4-channel 70V amplifier is replaced with an 8-channel version, it can store the
IP settings,
device name, as well as channel labels and subscriptions for the primary 4 channels - ANS-True
Dante Controller can do not forget a part of a preset - only storing facts about a few settings
and/or proscribing which gadgets we want to recollect them on. - ANS-True
For Dante AV, as much as X video channel(s) and up to Y audio channel(s) are to be had.
The chipset can Z. - ANS-For Dante AV, up to [ 1 ] video channel(s) and as much as [ 8 ] audio
channel(s) are to be had.
The chipset may be configured as an input or output.
HC and IP Core I/Os - ANS-512x512
