AET1 SWE Study material for USCG AET1 SWE With complete solution Newest RATED A+ 2025/2026 100% VERIFIED CORRECT

AET1 SWE Study material for USCG AET1 SWE With
complete solu on Newest RATED A+ 2025/2026 100%
VERIFIED CORRECT
How are terminal lugs placed on a stud? - Correct Answers Largest on bo om



What Manual is the M11000.11? - Correct Answers Coast Guard Civil Engineering Manual



How many grounds can be connected to a ground terminal? - Correct Answers No more than
4 (NavAir 01-1A-505-1 01700 pg 4)



PG 85-00-10 - Correct Answers ACMS Process Guide



What frequency will be most absorbed by the human body? - Correct Answers 30-300 MHz
(M10550.25A 4.1.10.2.3)



What Manual is the M13001.1? - Correct Answers USCG Avia3on Fuel Handling Procedures
Manual



The CG lowered the UHF frequency range from 300MHz to what? - Correct Answers 225
MHz



PG 85-00-20 - Correct Answers CG-22 Process Guide



What is the most dangerous thing about a strobe light? - Correct Answers High AC voltage- 3
minutes to discharge capacitor before handling (CGTO 1C-130H-2-33GS-00-1)

,What Manual is the M13020.1? - Correct Answers Aeronau3cal Engineering Maintenance
Management Manual



What would make a strobe light fail prematurely? - Correct Answers ???



PG 85-00-30 - Correct Answers Reliability Centered Maintenance Process Guide



What is the color of the plas3c tool for extrac3ng a pin? - Correct Answers White



What Manual is the M3710.1? - Correct Answers Coast Guard Air Opera3ons Manual



What is the max pressure that should be a ached to the HT9000 nitrigen heat gun? - Correct
Answers 200 psi or 5 to 7 psi for normal opera3ng (NavAir 505-1 1200 pg 5)



PG 85-00-45 - Correct Answers TCTO Process Guide



Whose responsibility is it to purchase general test bench equipment? - Correct Answers
Procurement of General Purpose Electronics Test Equipment used primarily for sta3on
maintenance and all specialized Electronics Test Equipment for other than avionics use is a MLC
or district responsibility (COMDTINST M13020.1F Ch8.E.2.e)



What Manual is the M5100.47? - Correct Answers CG Safety and Environmental Health
Manual



To prevent a spark what lead should you put on last? - Correct Answers Nega3ve- ON:
posi3ve then nega3ve OFF: nega3ve then posi3ve

(COMDTINST N10550.25A PG 4.1-33)

, PG 85-00-50 - Correct Answers TIMOS Process Guide



How do you neutralize NiCad ba ery acid? - Correct Answers 3% solu3on of ace3c acid
vinegar lemon juice or a 10% solu3on of Boric acid

(TO 1H65A-11-243200 pg 6)



What are the types of NMC (Not Mission Capable) according to the M13020 which are factored
into the NMCT (Not Mission Capable Total) - Correct Answers NMCM (Not Mission Capable
due to Maintenance)

NMCS (Not Mission Capable due to Supply)

NMCD (Not Mission Capable due to Depot Level Maintenance at the Unit)



PG 85-00—60 - Correct Answers Corrosion Control Process Guide



Electrolyte used in a Nickel Cadium ba ery is? - Correct Answers 30% Potassium Hydroxide:
70% Water



What would be a suitable storage place for lead-acid ba eries? - Correct Answers Ven3lated
fireproof rooms (PG 85-00-110 pg2-4)



How long must fuel samples be kept aEer being taken from a CG aircraE? - Correct Answers
For 24 hours or un3l a new set of fuel samples are taken.



If you get electrolyte in your eyes how long should you flush them with water? - Correct
Answers With large quan33es of water for at least 15 minutes. (PG 85-00-110 pg 2-3)



PG 85-00-70 - Correct Answers ACCB Process Guide