Osmose Pesticide Quiz / Actual Test Questions with Detailed Verified
Osmose Pesticide Quiz
Answers / Already Graded A / 2025
Study online at https://quizlet.com/_4gmd6n
1. Shipping papers Inform emergency response personnel of the quantity and types of Hazardous
are designed to? Materials that are being transported on a particular vehicle.
2. Precautionary Cat I - Danger (highly toxic) Cat II - Warning (moderately toxic) Cat III - Caution
statements and (slightly toxic) Cat IIII - (relatively non-toxic)
toxicity
categories.
3. When should you Always read the product label before using product. Before you select, buy or
read the product use the product. Before applying. After applying if anything out of the ordinary
label? happens. Before storing or disposing of the pesticide or pesticide containers.
4. Types of fumes WoodFume. MITC-Fume. DuraFume.
used.
5. Depth of hole 12" to 15"
drilled for
MITC-Fume.
6. Angle drilled for 45 degrees or steeper
MITC-Fume
7. Where do I start At ground level
drilling for MITC
8. In the absence of 28" or less- 2 holes beginning at ground line spaced 90 degrees apart and 6" to
contract specifica- 8" inches higher than first hole. 29" to 35" - 3 holes beginning at ground-line
tions, this chart spaced 120 degrees apart and 6" to 8" higher than previous hole. 36" to 49"
determines the - 4 holes beginning at ground line spaced 90 degrees apart and 6 to 8 inches
number or place- higher than previous hole. 50" to 59" - 5 holes beginning at ground line spaced
ment of appli- 70 degrees apart and 6 to 8 inches higher than previous hole.
cation holes for
MITC.
1/8
, Osmose Pesticide Quiz
Study online at https://quizlet.com/_4gmd6n
9. Steps to applying Have on proper PPE. Grab 1 tube at a time. Start at lowest hole first. Open tube
MITC-Fume (after away from face. Place in lowest hole (open end down). Place MITC tube cap in
drilling hole) hole. Plug hole.
10. SDS (mandatory Identification
parts) Hazard identification
Composition
First-aid measures
Fire-fighting measures
Accidental release measures
Handling and storage
Exposure controls, PPE
Physical and Chemical properties
Stability and reactivity
Toxicological information
Other information
11. SDS (non manda- Ecological information
tory parts) Disposal considerations
Transport information
Regulatory information
12. We cannot treat 50
a pole within how
many feet of a
well?
13. When symptoms Chronic poisoning
appear over a
long period of
time due to re-
peated exposures
2/8
Osmose Pesticide Quiz
Answers / Already Graded A / 2025
Study online at https://quizlet.com/_4gmd6n
1. Shipping papers Inform emergency response personnel of the quantity and types of Hazardous
are designed to? Materials that are being transported on a particular vehicle.
2. Precautionary Cat I - Danger (highly toxic) Cat II - Warning (moderately toxic) Cat III - Caution
statements and (slightly toxic) Cat IIII - (relatively non-toxic)
toxicity
categories.
3. When should you Always read the product label before using product. Before you select, buy or
read the product use the product. Before applying. After applying if anything out of the ordinary
label? happens. Before storing or disposing of the pesticide or pesticide containers.
4. Types of fumes WoodFume. MITC-Fume. DuraFume.
used.
5. Depth of hole 12" to 15"
drilled for
MITC-Fume.
6. Angle drilled for 45 degrees or steeper
MITC-Fume
7. Where do I start At ground level
drilling for MITC
8. In the absence of 28" or less- 2 holes beginning at ground line spaced 90 degrees apart and 6" to
contract specifica- 8" inches higher than first hole. 29" to 35" - 3 holes beginning at ground-line
tions, this chart spaced 120 degrees apart and 6" to 8" higher than previous hole. 36" to 49"
determines the - 4 holes beginning at ground line spaced 90 degrees apart and 6 to 8 inches
number or place- higher than previous hole. 50" to 59" - 5 holes beginning at ground line spaced
ment of appli- 70 degrees apart and 6 to 8 inches higher than previous hole.
cation holes for
MITC.
1/8
, Osmose Pesticide Quiz
Study online at https://quizlet.com/_4gmd6n
9. Steps to applying Have on proper PPE. Grab 1 tube at a time. Start at lowest hole first. Open tube
MITC-Fume (after away from face. Place in lowest hole (open end down). Place MITC tube cap in
drilling hole) hole. Plug hole.
10. SDS (mandatory Identification
parts) Hazard identification
Composition
First-aid measures
Fire-fighting measures
Accidental release measures
Handling and storage
Exposure controls, PPE
Physical and Chemical properties
Stability and reactivity
Toxicological information
Other information
11. SDS (non manda- Ecological information
tory parts) Disposal considerations
Transport information
Regulatory information
12. We cannot treat 50
a pole within how
many feet of a
well?
13. When symptoms Chronic poisoning
appear over a
long period of
time due to re-
peated exposures
2/8
