Page 1 of 191
ASSOCIATE SAFETY PROFESSIONAL ASP EXAM
ALL WITH 450 QUESTIONS AND CORRECT
DETAILED SOLUTIONS JUST RELEASED THIS
YEAR
QUESTION: According to 1910.145, what is the minimum reading distance when posting a
danger sign? - ANSWER✔✔Five feet
QUESTION: A fire resistive wall separating oxygen and fuel gases should be how high? -
ANSWER✔✔About five feet
QUESTION: A room designed for recharging of lead acid batteries does not require?? -
ANSWER✔✔Pressure relief panels
QUESTION: A solution contains 10-2 hydrogen ions per liter. What would this solution be
considered? - ANSWER✔✔A strong acid
QUESTION: Acclimatization to heat is generally achieved by requiring the employee to? -
ANSWER✔✔Work for two hours per day for two weeks.
, Page 2 of 191
New workers and those returning from a prolonged absence should begin with *20%* of the
workload on the first day, increasing incrementally by no more than *20%* each subsequent
day.
During a rapid change leading to excessively hot weather or conditions such as a *heat wave*,
even experienced workers should begin on the first day of work in excessive heat with *50%* of
the normal workload and time spent in the hot environment, *60%* on the second day, *80%*
on day three, and *100%* on the fourth day. *Full acclimatization* may take up to *14 days* or
longer depending on factors relating to the individual, such as increased risk of heat illness due
to certain medications or medical conditions, or the environment.
QUESTION: According to ANSI Z89.1-1997 specifications for helmets (hardhats) to protect
employees from impact of falling objects and from high voltage electrical shock. Which of the
following classes offer low voltage protection? - ANSWER✔✔G
QUESTION: According to OSHA 1910.217 "Mechanical Power Press" requires how much safe
distance per second of stopping time from "point of operation devices" to ensure the safety of
the operator? - ANSWER✔✔63 inches or 5.25 feet
QUESTION: According to OSHA HAZ Com; who has the responsibility to determine if a material
is hazardous? - ANSWER✔✔The manufacturer or importer of the chemical
, Page 3 of 191
QUESTION: According to the Commercial Motor Vehicle Safety Act of 1986, a CDL is required
for what operation?? - ANSWER✔✔Single vehicle with a GVW of 26,000lbs.
QUESTION: According to the fire protection handbook, although increasing storage heights
increases fire intensity, storage heights up to ____ feet in piled storage and up to _____ feet in
rack storage need not be adjusted. - ANSWER✔✔"12 feet for piled
15 feet for rack storage
QUESTION: "
According to the theory that "deformations are directly proportional to stresses", which
statement is true concerning the elastic limit and the yield point of structural steel? -
ANSWER✔✔The elastic limit has a lower value than the yield point
QUESTION: Administration - ANSWER✔✔Function of planning; organizing; coordination and
measuring performance and providing the data to the organization
QUESTION: Anthrax-bacterial - ANSWER✔✔Direct contact with infected animals, hides, and
wool. Risk is higher for veterinarians, farmers, butchers, leather and wool workers, carpet
workers.
, Page 4 of 191
QUESTION: A 40 ton gantry crane has been out of service for more than 6 months for structural
repair. It is required to be proof tested at ______?? Before being used? - ANSWER✔✔50 tons
QUESTION: A body that has a definite volume but no definite shape is? - ANSWER✔✔A liquid
QUESTION: A cage on a fixed ladder on a commercial ladder cannot extend any closer than how
many feet from the ground? - ANSWER✔✔OSHA 1910.27 "cages shall extend down the ladder
to a point of not less than 7 feet or more than 8 feet above the base of the ladder".
QUESTION: "A calorie is the amount of heat required to raise the temperature of one gram of
water __________
BTU is the measure of energy and is the amount of heat required to raise temperature of one
pound of water_______" - ANSWER✔✔"1 degree Celsius
1 degree Farenheit
QUESTION: "
A commercial motor vehicle transporting hazardous materials is required to display placards in
which of the following locations? - ANSWER✔✔Front, rear and both sides of vehicle
ASSOCIATE SAFETY PROFESSIONAL ASP EXAM
ALL WITH 450 QUESTIONS AND CORRECT
DETAILED SOLUTIONS JUST RELEASED THIS
YEAR
QUESTION: According to 1910.145, what is the minimum reading distance when posting a
danger sign? - ANSWER✔✔Five feet
QUESTION: A fire resistive wall separating oxygen and fuel gases should be how high? -
ANSWER✔✔About five feet
QUESTION: A room designed for recharging of lead acid batteries does not require?? -
ANSWER✔✔Pressure relief panels
QUESTION: A solution contains 10-2 hydrogen ions per liter. What would this solution be
considered? - ANSWER✔✔A strong acid
QUESTION: Acclimatization to heat is generally achieved by requiring the employee to? -
ANSWER✔✔Work for two hours per day for two weeks.
, Page 2 of 191
New workers and those returning from a prolonged absence should begin with *20%* of the
workload on the first day, increasing incrementally by no more than *20%* each subsequent
day.
During a rapid change leading to excessively hot weather or conditions such as a *heat wave*,
even experienced workers should begin on the first day of work in excessive heat with *50%* of
the normal workload and time spent in the hot environment, *60%* on the second day, *80%*
on day three, and *100%* on the fourth day. *Full acclimatization* may take up to *14 days* or
longer depending on factors relating to the individual, such as increased risk of heat illness due
to certain medications or medical conditions, or the environment.
QUESTION: According to ANSI Z89.1-1997 specifications for helmets (hardhats) to protect
employees from impact of falling objects and from high voltage electrical shock. Which of the
following classes offer low voltage protection? - ANSWER✔✔G
QUESTION: According to OSHA 1910.217 "Mechanical Power Press" requires how much safe
distance per second of stopping time from "point of operation devices" to ensure the safety of
the operator? - ANSWER✔✔63 inches or 5.25 feet
QUESTION: According to OSHA HAZ Com; who has the responsibility to determine if a material
is hazardous? - ANSWER✔✔The manufacturer or importer of the chemical
, Page 3 of 191
QUESTION: According to the Commercial Motor Vehicle Safety Act of 1986, a CDL is required
for what operation?? - ANSWER✔✔Single vehicle with a GVW of 26,000lbs.
QUESTION: According to the fire protection handbook, although increasing storage heights
increases fire intensity, storage heights up to ____ feet in piled storage and up to _____ feet in
rack storage need not be adjusted. - ANSWER✔✔"12 feet for piled
15 feet for rack storage
QUESTION: "
According to the theory that "deformations are directly proportional to stresses", which
statement is true concerning the elastic limit and the yield point of structural steel? -
ANSWER✔✔The elastic limit has a lower value than the yield point
QUESTION: Administration - ANSWER✔✔Function of planning; organizing; coordination and
measuring performance and providing the data to the organization
QUESTION: Anthrax-bacterial - ANSWER✔✔Direct contact with infected animals, hides, and
wool. Risk is higher for veterinarians, farmers, butchers, leather and wool workers, carpet
workers.
, Page 4 of 191
QUESTION: A 40 ton gantry crane has been out of service for more than 6 months for structural
repair. It is required to be proof tested at ______?? Before being used? - ANSWER✔✔50 tons
QUESTION: A body that has a definite volume but no definite shape is? - ANSWER✔✔A liquid
QUESTION: A cage on a fixed ladder on a commercial ladder cannot extend any closer than how
many feet from the ground? - ANSWER✔✔OSHA 1910.27 "cages shall extend down the ladder
to a point of not less than 7 feet or more than 8 feet above the base of the ladder".
QUESTION: "A calorie is the amount of heat required to raise the temperature of one gram of
water __________
BTU is the measure of energy and is the amount of heat required to raise temperature of one
pound of water_______" - ANSWER✔✔"1 degree Celsius
1 degree Farenheit
QUESTION: "
A commercial motor vehicle transporting hazardous materials is required to display placards in
which of the following locations? - ANSWER✔✔Front, rear and both sides of vehicle
