Basic Firefighter Written EXAM comprehensive
questions and verified accurate solution (detailed
& elaborated) 2025 TEST!!
Save
Terms in this set (129)
When using a rotary saw, maximum
start all cuts at rpm to
prevent blades from
binding into the material.
is an example of a halligan
common prying tool.
An swinging door is outward
indicated by the hinges
being visible.
is an example of a pulling sheetrock rake
tool.
The and the are commonly halligan Flat head axe
paired together as "irons".
When breaking glass, up-wind blunt/flat corner
stand , use the side of the
tool and strike the of the
pane.
https://quizlet.com/1057698534/basic-firefighter-written-exam-comprehensive-questions-and-verified-accurate-solution-detailed-elaborated-2025-test-… 1/16
,30/06/2025, 12:27 Basic Firefighter Written EXAM comprehensive questions and verified accurate solution (detailed & elaborated) 2025 TEST!! Flash…
When getting a power start turn off
tool from an apparatus for
use on the fire ground,
immediately the tool, after
warming the tool, and
then carry the tool to
where it will be used.
A is an example of a sledge hammer
striking tool.
A is an example of a reciprocating saw (Sawzall)
cutting tool.
When forcing entry link/chain
through chained gates,
you should cut the and
not the lock.
What is the order of 1. protect exposures
priorities when 2. cut off fire spread
suppressing structure 3. attack seat of the fire
fires?
When advancing a hose- accessible
line into a structure,
extinguish any fire that is
visible and .
A vehicle fire should be 45
fought from a degree
angle.
If you are advancing an crawl
attack line into a structure
and CANNOT see your
feet, you should .
and are the appropriate 2 1/2 1 3/4
hose sizes for attacking a
structure fire.
https://quizlet.com/1057698534/basic-firefighter-written-exam-comprehensive-questions-and-verified-accurate-solution-detailed-elaborated-2025-test-… 2/16
, 30/06/2025, 12:27 Basic Firefighter Written EXAM comprehensive questions and verified accurate solution (detailed & elaborated) 2025 TEST!! Flash…
Directing fire streams indirect
toward the ceiling or wall
of a room or building in
order to generate large
amount of steam is an
attack.
At a structure fire, the exposures
highest priority are close
priority fuel tanks and
propane cylinders.
A attack is discharging direct
water or foam directly
onto a burning material.
When extinguishing a downwind
container fire you should
never approach from
downhill or .
You should first direct ceiling
your fire stream at the
during a combination fire
attack.
The process of hauling water shuttle
water from a fill site to a
dump site is the definition
of a .
hydrants are installed in dry barrel
areas where prolonged
periods of subfreezing
weather are common.
The process of drawing drafting
water from a static source
to supply a pumper is
known as .
https://quizlet.com/1057698534/basic-firefighter-written-exam-comprehensive-questions-and-verified-accurate-solution-detailed-elaborated-2025-test-… 3/16