Ace the CSX Final Exam: Conductor Training Review & Practice Questions & Answers. 2025/26
UPDATES. VERIFIED.
About This Final Exam Resource:
This CSX Freight Conductor Final Exam Study Guide is built to help you pass your final test with
confidence. Covering the full range of topics from CSX’s conductor training — including railroad
operations, safety rules, air brake systems, switching procedures, and hazmat handling — this
resource features realistic practice questions, scenario-based items, and a complete answer key with
rationales. Perfect for trainees preparing for certification or anyone entering the freight rail industry.
A job briefing is required when the work activity or conditions change and what other reasons? - ✔✔-
Another employee joins the crew or workgroup
After coupling cars to your locomotive what is your next step? - ✔✔-Stretch the slack
After the air brake test but before proceeding what must you ensure happens? - ✔✔-Brake pipe pressure
is being restored at the rear of the train
After working 12 hours how many hours of undisturbed rest are you required to have? - ✔✔-10 hours
As a crewmember, what are you responsible for? Select all that apply - ✔✔-1) Complying with all rules
2) Ensuring cars and locomotives receive the required inspections and brake tests
Before coupling to equipment, what must you ensure? Select all that apply - ✔✔-1) Couplers are in line
2) At least 1 knuckle is open
Before moving a damaged car you must: Multiple Part T/F
1) Do Nothing
2) Couple To it
3) Obtain instructions from the Mechanical and Transportation Departments
4) Inform the train dispatcher of the movement - ✔✔-1) False
2) False
3) True
,4) True
Before operating a switch what must an employee do? Select all that apply - ✔✔-1) The device is not
locked spiked or tagged out of service and no obstructions interfere with normal movement
2) No conflicting movements
Before operating a switch you must remove any obstructions from the switch point area and what else?
Select all that apply - ✔✔-1) Inspect for tags attached
2) Inspect for any locks
Blue signals identify that: - ✔✔-workmen are on, under, or between equipment
Do not ride the foot stirrup of a flat car unless: - ✔✔-It is equipped with a horizontal grab bar at least 12
inches above the deck of the car
During your job briefing you notice the dispatcher bulletin has irregularities that are not the names or
employee ids of the conductor or engineer, What do you do? - ✔✔-Contact Dispatcher and obtain
corrected copies
Employees are prohibited from possessing or being under the influence of alcohol when? Select all that
apply - ✔✔-1) Reporting for duty or on duty
2) On CSX Property or occupying facilities provided by CSX
How do you test for a hot bearing? Select all that apply? - ✔✔-1) A 169 degree Tempilstik
2) Pass hand near the bearing without touching it
How far from an electric locked switch must a train be to operate the switch? - ✔✔-Within 100 ft
How long do you have to perform a retest on air brakes when the air brakes fail? - ✔✔-3 minutes
How long must you retain a dispatcher bulletin? - ✔✔-For entire tour of duty on all trips
, How many brakes must be operable during a class 1 brake test? - ✔✔-Each car's brakes must apply and
release
How many handbrakes are required on 100 cars being left in a track? - ✔✔-At least 1
How many hours does a class 1 brake test remain good if the train is off air? MPTF
1) 26 hours
2) 24 Hours
3) 8 Hours
4) 19 hours - ✔✔-1) False
2) True
3) False
4) False
How should you separate air hoses? - ✔✔-With train movement
If you discover a broken wheel on a car you should get instructions from engineering before moving. True
or False - ✔✔-False
If you encounter a lock that is defective or missing and a replacement is not immediately available, What
must you do? - ✔✔-Report it to the proper authority
Illegal narcotics cannot be used on duty and what other occasions? - ✔✔-Occupying CSX Property or off
duty
In addition to facing the equipment and maintaining 3 points of contact, what other steps must be taken
when dismounting moving equipment? - ✔✔-Do so clear of any obstructions and stop on the bottom step
to ensure solid footing before dismount
MPTF: To prevent slips and falls:
UPDATES. VERIFIED.
About This Final Exam Resource:
This CSX Freight Conductor Final Exam Study Guide is built to help you pass your final test with
confidence. Covering the full range of topics from CSX’s conductor training — including railroad
operations, safety rules, air brake systems, switching procedures, and hazmat handling — this
resource features realistic practice questions, scenario-based items, and a complete answer key with
rationales. Perfect for trainees preparing for certification or anyone entering the freight rail industry.
A job briefing is required when the work activity or conditions change and what other reasons? - ✔✔-
Another employee joins the crew or workgroup
After coupling cars to your locomotive what is your next step? - ✔✔-Stretch the slack
After the air brake test but before proceeding what must you ensure happens? - ✔✔-Brake pipe pressure
is being restored at the rear of the train
After working 12 hours how many hours of undisturbed rest are you required to have? - ✔✔-10 hours
As a crewmember, what are you responsible for? Select all that apply - ✔✔-1) Complying with all rules
2) Ensuring cars and locomotives receive the required inspections and brake tests
Before coupling to equipment, what must you ensure? Select all that apply - ✔✔-1) Couplers are in line
2) At least 1 knuckle is open
Before moving a damaged car you must: Multiple Part T/F
1) Do Nothing
2) Couple To it
3) Obtain instructions from the Mechanical and Transportation Departments
4) Inform the train dispatcher of the movement - ✔✔-1) False
2) False
3) True
,4) True
Before operating a switch what must an employee do? Select all that apply - ✔✔-1) The device is not
locked spiked or tagged out of service and no obstructions interfere with normal movement
2) No conflicting movements
Before operating a switch you must remove any obstructions from the switch point area and what else?
Select all that apply - ✔✔-1) Inspect for tags attached
2) Inspect for any locks
Blue signals identify that: - ✔✔-workmen are on, under, or between equipment
Do not ride the foot stirrup of a flat car unless: - ✔✔-It is equipped with a horizontal grab bar at least 12
inches above the deck of the car
During your job briefing you notice the dispatcher bulletin has irregularities that are not the names or
employee ids of the conductor or engineer, What do you do? - ✔✔-Contact Dispatcher and obtain
corrected copies
Employees are prohibited from possessing or being under the influence of alcohol when? Select all that
apply - ✔✔-1) Reporting for duty or on duty
2) On CSX Property or occupying facilities provided by CSX
How do you test for a hot bearing? Select all that apply? - ✔✔-1) A 169 degree Tempilstik
2) Pass hand near the bearing without touching it
How far from an electric locked switch must a train be to operate the switch? - ✔✔-Within 100 ft
How long do you have to perform a retest on air brakes when the air brakes fail? - ✔✔-3 minutes
How long must you retain a dispatcher bulletin? - ✔✔-For entire tour of duty on all trips
, How many brakes must be operable during a class 1 brake test? - ✔✔-Each car's brakes must apply and
release
How many handbrakes are required on 100 cars being left in a track? - ✔✔-At least 1
How many hours does a class 1 brake test remain good if the train is off air? MPTF
1) 26 hours
2) 24 Hours
3) 8 Hours
4) 19 hours - ✔✔-1) False
2) True
3) False
4) False
How should you separate air hoses? - ✔✔-With train movement
If you discover a broken wheel on a car you should get instructions from engineering before moving. True
or False - ✔✔-False
If you encounter a lock that is defective or missing and a replacement is not immediately available, What
must you do? - ✔✔-Report it to the proper authority
Illegal narcotics cannot be used on duty and what other occasions? - ✔✔-Occupying CSX Property or off
duty
In addition to facing the equipment and maintaining 3 points of contact, what other steps must be taken
when dismounting moving equipment? - ✔✔-Do so clear of any obstructions and stop on the bottom step
to ensure solid footing before dismount
MPTF: To prevent slips and falls:
