Canadian ATPL 2017-18 (SARON)\NEWEST VERSION
2025-2026 \COMPLETE QUESTIONS AND ACCURATE
DETAILED ANSWERS \VERIFIED SOLUTIONS ALREADY
GRADED A+
A Turbojet aircraft in a 705 15% of the dry Landing
that does not contain Distance Available. In other
information for landing on words, 115% of Dry LDA.
a wet runway in it's AFM
and is planning to land into
a wet runway. In order to
be
dispatched, the air operator
must increase the
calculated runway
requirements for an
additional:
A Turbojet aircraft in a 705 60%
operation may not be
dispatched unless the As a note, it can be dispatched if the destination doesn't
landing distance required meet this requirement but the alternate at the time of
at the destination or arrival does.
alternate is at most of the
available
landing distance.
A turboprop aircraft (turbo-jet 70%
pr large
aircraft) operated in a
Commuter Operation may
not be dispatched unless
the Landing Distance
Required at the Alternate
and Destination is at
1/1
4
, 6/26/25, 11:55 AM Canadian ATPL 2017-18 (SARON)
most _________ of the
Landing
Distance Available
1) Danger/Warning cones placed either side and in
front of the props to prevent people from walking
An Airplane may be left into them are place.
running only if: (3
Criteria) 2) Someone competent at the controls
The Aircraft is in the pilot's line of sight
3)
When a PPC has lapsed for more 24 Months
than _____ than the initial
requirements of the PPC
must be complied with.
Safe movement of The Air Operator
passengers to and from the
airplane is the
responsibility of who?
What is required for a flight A defensive flight plan or Itinerary
within or into the ADIZ?
1) Controlled
A low level airway is
2) 2,200' AGL
______________ airspace and
extends from _____ to _.
3) 17,999' ASL
1) 7nm
A control zone has a
______________ radius and
the 2) 3,000 Above Aerodrome Elevation
normal vertical extent is up to
___________________ _.
1) Uncontrolled
A low level air route is
2) Surface of the earth
_______________ airspace
and
extends from _____ up to _. 3) 17,999' ASL
What is the maximum speed 200 KIAS
below 3,000'
AGL within 10nm of an
2/1
4