Cm 2215 Osha 510 Accurate Final Exam (Constructions
Industry) Questions with Correct Answers | Graded A+
Protect safety and health of America's workers - CORRECT ANS - ✔✔OSHA's mission is to
11(c) - CORRECT ANS - ✔✔The right of the worker to seek safety and health on the job site without
fear of punishment can be found in Section of the OSH Act
lower morale and increased training costs - CORRECT ANS - ✔✔Results of workplace injuries and
illnesses may include
specific industry - CORRECT ANS - ✔✔Horizontal standards apply when a condition is not covered by a
standard
consistent - CORRECT ANS - ✔✔The purpose of OSHA directives, including Enforcement and
Compliance Directives (CPL), is to ensure OSHA regulations
cited violation - CORRECT ANS - ✔✔OSHA requires that employers certify that abatement is complete
for each
its workers - CORRECT ANS - ✔✔Creating employer failed to inform employees, other than , of
damaged guardrail would result in a "creating" employer receiving a citation under OSHA's multi-
employer citation policy for damaging a guardrail exposing all employees to a fall hazard.
opening, walk through/around, closing - CORRECT ANS - ✔✔In addition to the presentation of
credentials, the inspection process includes the conference, the inspection, and the
conference.
partial - CORRECT ANS - ✔✔As a result of a work-related illness or injury, days the employee was only
able to work a shift would be classified as restricted work activity (not including the day the
illness or injury began).
100 - CORRECT ANS - ✔✔In OSHA Record keeping, an incidence rate is the number of recordable
injuries or illness per
full-time workers.
, following - CORRECT ANS - ✔✔Managers should be an example by knowing and the rules employees
are expected to follow to demonstrate management leadership and commitment to safety and health
competent - CORRECT ANS - ✔✔The two main components of an employer's accident and prevention
responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a
person.
100 - CORRECT ANS - ✔✔The maximum travel distance from any point of the protected area to the
nearest fire extinguisher shall not exceed feet
visible - CORRECT ANS - ✔✔Accident prevention signs such as; danger, caution, and exit signs shall be
when work is being performed.
3.5 - CORRECT ANS - ✔✔When stopping a fall, a personal fall arrest system, shall bring an employee to
a complete stop and limit the maximum deceleration distance to feet.
maintained - CORRECT ANS - ✔✔All hand and power tools, whether paid for by the employer or
employee, shall be in a safe condition.
qualified - CORRECT ANS - ✔✔A person who has a recognized degree, certificate, or professional
standing or who has demonstrated his/her ability to solve problems relating to specific work is a
person.
sheilded - CORRECT ANS - ✔✔Whenever practicable, all arc welding and cutting operations shall be
to protect employees and other persons working in the vicinity
fire - CORRECT ANS - ✔✔Failure to inspect for oil or grease on regulator fittings, valves, or the cap
threads on a cylinder of oxygen can result in or explosion.
6 - CORRECT ANS - ✔✔Personal fall arrest systems, when stopping a fall, shall be rigged such that an
employee cannot free fall more than feet or contact any lower level.
10 - CORRECT ANS - ✔✔When mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than feet.
Industry) Questions with Correct Answers | Graded A+
Protect safety and health of America's workers - CORRECT ANS - ✔✔OSHA's mission is to
11(c) - CORRECT ANS - ✔✔The right of the worker to seek safety and health on the job site without
fear of punishment can be found in Section of the OSH Act
lower morale and increased training costs - CORRECT ANS - ✔✔Results of workplace injuries and
illnesses may include
specific industry - CORRECT ANS - ✔✔Horizontal standards apply when a condition is not covered by a
standard
consistent - CORRECT ANS - ✔✔The purpose of OSHA directives, including Enforcement and
Compliance Directives (CPL), is to ensure OSHA regulations
cited violation - CORRECT ANS - ✔✔OSHA requires that employers certify that abatement is complete
for each
its workers - CORRECT ANS - ✔✔Creating employer failed to inform employees, other than , of
damaged guardrail would result in a "creating" employer receiving a citation under OSHA's multi-
employer citation policy for damaging a guardrail exposing all employees to a fall hazard.
opening, walk through/around, closing - CORRECT ANS - ✔✔In addition to the presentation of
credentials, the inspection process includes the conference, the inspection, and the
conference.
partial - CORRECT ANS - ✔✔As a result of a work-related illness or injury, days the employee was only
able to work a shift would be classified as restricted work activity (not including the day the
illness or injury began).
100 - CORRECT ANS - ✔✔In OSHA Record keeping, an incidence rate is the number of recordable
injuries or illness per
full-time workers.
, following - CORRECT ANS - ✔✔Managers should be an example by knowing and the rules employees
are expected to follow to demonstrate management leadership and commitment to safety and health
competent - CORRECT ANS - ✔✔The two main components of an employer's accident and prevention
responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a
person.
100 - CORRECT ANS - ✔✔The maximum travel distance from any point of the protected area to the
nearest fire extinguisher shall not exceed feet
visible - CORRECT ANS - ✔✔Accident prevention signs such as; danger, caution, and exit signs shall be
when work is being performed.
3.5 - CORRECT ANS - ✔✔When stopping a fall, a personal fall arrest system, shall bring an employee to
a complete stop and limit the maximum deceleration distance to feet.
maintained - CORRECT ANS - ✔✔All hand and power tools, whether paid for by the employer or
employee, shall be in a safe condition.
qualified - CORRECT ANS - ✔✔A person who has a recognized degree, certificate, or professional
standing or who has demonstrated his/her ability to solve problems relating to specific work is a
person.
sheilded - CORRECT ANS - ✔✔Whenever practicable, all arc welding and cutting operations shall be
to protect employees and other persons working in the vicinity
fire - CORRECT ANS - ✔✔Failure to inspect for oil or grease on regulator fittings, valves, or the cap
threads on a cylinder of oxygen can result in or explosion.
6 - CORRECT ANS - ✔✔Personal fall arrest systems, when stopping a fall, shall be rigged such that an
employee cannot free fall more than feet or contact any lower level.
10 - CORRECT ANS - ✔✔When mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than feet.
