Rowpu questions with correct answers
How many persons set up as a ROWPU 1500? - answer-2
c c c c c c c c c c
What hose connection point on a Rowpu has a 1.5" connection? - answer-Product water
c c c c c c c c c c c c c
Which pump will also function as a back wash pump? - answer-Raw water pump 2
c c c c c c c c c c c c c c
How much polymer will be used in a pail with 3 gallons of water? - answer-125 ml
c c c c c c c c c c c c c c c c
How much sodium hexametaphosphate will be used in a pail with 3 gallons of water? -
c c c c c c c c c c c c c c c
answer-80 ml
c c
What type power source connection must be used to? - answer-One 200 amp 3 phase
c c c c c c c c c c c c c c
connection
c
Before starting the ROWPU how many drain valves need to be closed on the 1500? -
c c c c c c c c c c c c c c c
answer-7
c
Before starting the rowpu how many vent valves need to be closed on the 1500? -
c c c c c c c c c c c c c c c
answer-12
c
During initial start up what raw water flow do you want to establish? - answer-45-52 gpm
c c c c c c c c c c c c c c c
Before start up, what position should the chemical feed valves be in? - answer-Prime
c c c c c c c c c c c c c
What is the goal turbidity you want to achieve? - answer-Less than 2 NTU
c c c c c c c c c c c c c
What is the maximum RO pressure allowed for freshwater? - answer-550 psi
c c c c c c c c c c c
What is the allowable bag filter differential pressure? - answer-0-20 psid
c c c c c c c c c c
What is the minimum TDS rejection rate? - answer-96.5%
c c c c c c c c
How long does a full back wash cycle last? - answer-12 minutes (8 for back wash) (4 for
c c c c c c c c c c c c c c c c c
rinse)
c
During a backwash, what is the maximum water flow? - answer-50 GPM
c c c c c c c c c c c
How often should I citric acid feed be done? - answer-After 20 hours of operation
c c c c c c c c c c c c c c
How much citric acid is mixed with 3 gallons of water in a pail? - answer-1 1/2 pounds
c c c c c c c c c c c c c c c c c
How many persons set up as a ROWPU 1500? - answer-2
c c c c c c c c c c
What hose connection point on a Rowpu has a 1.5" connection? - answer-Product water
c c c c c c c c c c c c c
Which pump will also function as a back wash pump? - answer-Raw water pump 2
c c c c c c c c c c c c c c
How much polymer will be used in a pail with 3 gallons of water? - answer-125 ml
c c c c c c c c c c c c c c c c
How much sodium hexametaphosphate will be used in a pail with 3 gallons of water? -
c c c c c c c c c c c c c c c
answer-80 ml
c c
What type power source connection must be used to? - answer-One 200 amp 3 phase
c c c c c c c c c c c c c c
connection
c
Before starting the ROWPU how many drain valves need to be closed on the 1500? -
c c c c c c c c c c c c c c c
answer-7
c
Before starting the rowpu how many vent valves need to be closed on the 1500? -
c c c c c c c c c c c c c c c
answer-12
c
During initial start up what raw water flow do you want to establish? - answer-45-52 gpm
c c c c c c c c c c c c c c c
Before start up, what position should the chemical feed valves be in? - answer-Prime
c c c c c c c c c c c c c
What is the goal turbidity you want to achieve? - answer-Less than 2 NTU
c c c c c c c c c c c c c
What is the maximum RO pressure allowed for freshwater? - answer-550 psi
c c c c c c c c c c c
What is the allowable bag filter differential pressure? - answer-0-20 psid
c c c c c c c c c c
What is the minimum TDS rejection rate? - answer-96.5%
c c c c c c c c
How long does a full back wash cycle last? - answer-12 minutes (8 for back wash) (4 for
c c c c c c c c c c c c c c c c c
rinse)
c
During a backwash, what is the maximum water flow? - answer-50 GPM
c c c c c c c c c c c
How often should I citric acid feed be done? - answer-After 20 hours of operation
c c c c c c c c c c c c c c
How much citric acid is mixed with 3 gallons of water in a pail? - answer-1 1/2 pounds
c c c c c c c c c c c c c c c c c