ELECTROLYSIS IBEC AND LASER STATE BOARD EXAM WITH 500 QUESTIONS AND 100% VERIFIED CORRECT ANSWERS [ALREADY GRADED A+] ||ELECTROYSIS IEBC AND LASER STATE BOARD LATEST ||GUARANTEED PASS [BRAND NEW!!

ELECTROLYSIS IBEC AND LASER STATE
BOARD EXAM WITH 500 QUESTIONS AND 100%
VERIFIED CORRECT ANSWERS [ALREADY
GRADED A+] ||ELECTROYSIS IEBC AND LASER
STATE BOARD LATEST ||GUARANTEED PASS
[BRAND NEW!!


What are the states of light in stimulated emission? - ANSWER ✔✔- Ground State
Excited State
Singlet State
Metastable State


Alexandrite laer is in the visible light spectrum at what wavelength? - ANSWER
✔✔- 755 nm


The Nd:YAG laser falls in the invisible light spectrum with a wavelength of what?
- ANSWER ✔✔- 1064 nm


What type of wave is used in laser hair removal? - ANSWER ✔✔- Pulsed wave


A chromophore is also know at what? - ANSWER ✔✔- Target


The chromophore absorbs what? - ANSWER ✔✔- Energy



1|Page

,Goggles worn by the patient and practitioner must be approved by which group? -
ANSWER ✔✔- ANSI (American National Standard Institute) for Class 3B and
Class 4 Lasers


Each laser wavelength is what to its machine? - ANSWER ✔✔- Specific


What are the parameters when doing laser hair removal? - ANSWER ✔✔-
Wavelength
Spot Size
Fluence
Pulse Width


Pulsed lasers allow for selective heating of specific targets, this is also known as? -
ANSWER ✔✔- Selective Photothermolysis


The rate/amount of energy delivered within a given area is known as? - ANSWER
✔✔- Fluence


An increase in fluence equals an increase in what? - ANSWER ✔✔- Heat.
Resulting in more damage


The length of time the light/energy is in contact with the target that is measured in
milliseconds (ms): - ANSWER ✔✔- Pulse width/Pulse duration


If the time of pulse duration is changed from milliseconds to nanoseconds the laser
is what? - ANSWER ✔✔- Q Switched



2|Page

,A Q switched laser is used for what? - ANSWER ✔✔- Tattoo removal


Which skin types can tolerate an Alex laser? - ANSWER ✔✔- 1-4


Which skin types can tolerate a Nd:YAG laser? - ANSWER ✔✔- All skin types


Which skin type should only have electrolysis and no laser? - ANSWER ✔✔-
Type 1


If the pulse width is greater than the thermal relaxation time it results in? -
ANSWER ✔✔- A burn


If the pulse width is less than or equal to the thermal relaxation time it results in? -
ANSWER ✔✔- Perfect hair removal


Larger structures have __________ thermal relaxation times (TRT) - ANSWER
✔✔- Longer


Smaller structures have _______ thermal relaxation times (TRT) - ANSWER ✔✔-
Shorter


What kind of pulse widths protect the epidermis, penetrate deeper and cool more
slowly? - ANSWER ✔✔- Long


Longer pulse widths are for what skin type? - ANSWER ✔✔- 4-6



3|Page

, What kind of pulse widths are more aggressive and heat up and cool down
quickly? - ANSWER ✔✔- Short


Shorter pulse widths are for what skin type? - ANSWER ✔✔- 1-3


What percentage of follicles are damaged with each laser treatment? - ANSWER
✔✔- 15%


What is a long-term stable reduction of the growing hairs after a treatment regime?
- ANSWER ✔✔- Laser Hair Removal (LHR)


What does the FDA call laser hair removal? - ANSWER ✔✔- Permanent hair
reduction


What is the highest setting the skin can tolerate without damage called? -
ANSWER ✔✔- Fluence Threshold


What is the highest setting the patient can tolerate without the treatment becoming
impossible called? - ANSWER ✔✔- Patient Threshold


The amount of hair per one square centimeter is known as? - ANSWER ✔✔- Hair
density


The higher the hair density, the _______ the fluence? - ANSWER ✔✔- Lower


What percentage of overlapping do you want when doing LHR? - ANSWER ✔✔-
30%

4|Page