PA State Inspection Review (Day #3 -
Subchapter E cont...)
Save
True or False: The battery should be securely fastened with a device specifically designed for
that function. True
True or False: You should always remove a car seat from the vehicle before beginning
inspection. False
True or False: The visual inspection of the Emission Control System shall be performed through
direct observation or through indirect observation, using a mirror or other visual aid. True
True or False: When checking tires you should check the following: outside sidewall, inside
sidewall, and tread. True
What is the maximum width of a fender flare? (inches) 3
Is a tire rejectable if it exceeds the recommended load rating listed inside the door jam of the
vehicle? (Yes or No) No
True or False: If the vehicle frame is not in solid condition, reject. True
True or False: During inspection, you should not perform a road test due to liability issues.
False
Can you pass a vehicle with a muffler with external repairs? (Yes or No) No
True or False: When inspecting the suspension system, ball joint movement in excess of the
manufacturer's specifications is cause for rejection. True
True or False: When inspecting the floor, any holes in the floor bed may pass as long as they are
covered by floor mats.False
True or False: A vehicle may be rejected if a tire is so worn that the tread wear indicators contact
the road in any two adjacent grooves. True
True or False: If the speedometer does not operate, the vehicle may still pass inspection. False
Subchapter E cont...)
Save
True or False: The battery should be securely fastened with a device specifically designed for
that function. True
True or False: You should always remove a car seat from the vehicle before beginning
inspection. False
True or False: The visual inspection of the Emission Control System shall be performed through
direct observation or through indirect observation, using a mirror or other visual aid. True
True or False: When checking tires you should check the following: outside sidewall, inside
sidewall, and tread. True
What is the maximum width of a fender flare? (inches) 3
Is a tire rejectable if it exceeds the recommended load rating listed inside the door jam of the
vehicle? (Yes or No) No
True or False: If the vehicle frame is not in solid condition, reject. True
True or False: During inspection, you should not perform a road test due to liability issues.
False
Can you pass a vehicle with a muffler with external repairs? (Yes or No) No
True or False: When inspecting the suspension system, ball joint movement in excess of the
manufacturer's specifications is cause for rejection. True
True or False: When inspecting the floor, any holes in the floor bed may pass as long as they are
covered by floor mats.False
True or False: A vehicle may be rejected if a tire is so worn that the tread wear indicators contact
the road in any two adjacent grooves. True
True or False: If the speedometer does not operate, the vehicle may still pass inspection. False
