7/3/2026 7/3/2026, 4:29:25 PM 7/3/2026, 4:29:22 PM
https://www.stuvia.com/user/reeveanthony
https://www.stuvia.com/user/reeveanthonyhttps://www.stuvia.com/user/reeveanthony
NACE CIP 1 CBT Exam
(Quizzes & Study Questions)
| Nursing Acceleration
Challenge Prep Guide
https://www.stuvia.com/user/reevhttps://www.stuvia.com/user/reeveanthony
eanthonyhttps://www.stuvia.com/user/reeveanthonyhttps://www.stuvia.com/user/reeveanthony
7/3/2026, 4:29:17 PM 7/3/2026, 4:29:19 PM 7/3/2026, 4:29:20 PM
,7/3/2026 7/3/2026, 4:29:25 PM 7/3/2026, 4:29:22 PM
How is the process of steel corrosion ALWAYS described?
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be
used effectively as galvanic anodes for carbon steel?
zinc, aluminum, magnesium
A decrease in temperature will generally cause the corrosion rate to _____
decrease
The electrolyte is a medium which carries the following type of current?
Ionic
Corrosion occurring uniformly across a surface is called _____
general corrosion
When a conflict occurs on a coatings project, as the inspector, the preferred first course of
action is to _____
actively listen and endeavor to understand the positions of others
A proper coating specification should contain information regarding ____, ____, and ____
surface preparation standards, safety, and locations to be used
Is it ever okay to accept a gift from a contractor?
NO
What should you do if you find discrepancies between the specification and the coating
manufacturer's technical data sheet?
seek written clarification from the owner's representative
What are the general components of inspection reports?
- results of inspection tests
- location(s) of work
- details of preparation and application
7/3/2026, 4:29:17 PM 7/3/2026, 4:29:19 PM 7/3/2026, 4:29:20 PM
, 7/3/2026 7/3/2026, 4:29:25 PM 7/3/2026, 4:29:22 PM
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___
___ ___
- contractor's performance
- inspector's performance
- job progress
- work interruptions
As an inspector headed to the job site for the first time, where would you always find instruction
regarding appropriate types of PPE?
Safety Data Sheet (SDS), previously called MSDS
Materials inventory report should contain which of the following?
- quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
The primary function of the coating inspector is _____
specification compliance
High humidity in the air during coating application can cause _____
solvent entrapment
The temperature at which moisture condenses on a surface is called _____
dew point
Where should the steel surface temperature reading be taken?
at the actual work location
What type of water should be added to a sling psychrometer?
distilled
Which type of coating is manufactured with the specific components added to slow down the
activity of the electrochemical cell?
inhibitive
Which coating component forms a stable film that retains its characteristic properties?
binder/resin
7/3/2026, 4:29:17 PM 7/3/2026, 4:29:19 PM 7/3/2026, 4:29:20 PM
https://www.stuvia.com/user/reeveanthony
https://www.stuvia.com/user/reeveanthonyhttps://www.stuvia.com/user/reeveanthony
NACE CIP 1 CBT Exam
(Quizzes & Study Questions)
| Nursing Acceleration
Challenge Prep Guide
https://www.stuvia.com/user/reevhttps://www.stuvia.com/user/reeveanthony
eanthonyhttps://www.stuvia.com/user/reeveanthonyhttps://www.stuvia.com/user/reeveanthony
7/3/2026, 4:29:17 PM 7/3/2026, 4:29:19 PM 7/3/2026, 4:29:20 PM
,7/3/2026 7/3/2026, 4:29:25 PM 7/3/2026, 4:29:22 PM
How is the process of steel corrosion ALWAYS described?
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be
used effectively as galvanic anodes for carbon steel?
zinc, aluminum, magnesium
A decrease in temperature will generally cause the corrosion rate to _____
decrease
The electrolyte is a medium which carries the following type of current?
Ionic
Corrosion occurring uniformly across a surface is called _____
general corrosion
When a conflict occurs on a coatings project, as the inspector, the preferred first course of
action is to _____
actively listen and endeavor to understand the positions of others
A proper coating specification should contain information regarding ____, ____, and ____
surface preparation standards, safety, and locations to be used
Is it ever okay to accept a gift from a contractor?
NO
What should you do if you find discrepancies between the specification and the coating
manufacturer's technical data sheet?
seek written clarification from the owner's representative
What are the general components of inspection reports?
- results of inspection tests
- location(s) of work
- details of preparation and application
7/3/2026, 4:29:17 PM 7/3/2026, 4:29:19 PM 7/3/2026, 4:29:20 PM
, 7/3/2026 7/3/2026, 4:29:25 PM 7/3/2026, 4:29:22 PM
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___
___ ___
- contractor's performance
- inspector's performance
- job progress
- work interruptions
As an inspector headed to the job site for the first time, where would you always find instruction
regarding appropriate types of PPE?
Safety Data Sheet (SDS), previously called MSDS
Materials inventory report should contain which of the following?
- quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
The primary function of the coating inspector is _____
specification compliance
High humidity in the air during coating application can cause _____
solvent entrapment
The temperature at which moisture condenses on a surface is called _____
dew point
Where should the steel surface temperature reading be taken?
at the actual work location
What type of water should be added to a sling psychrometer?
distilled
Which type of coating is manufactured with the specific components added to slow down the
activity of the electrochemical cell?
inhibitive
Which coating component forms a stable film that retains its characteristic properties?
binder/resin
7/3/2026, 4:29:17 PM 7/3/2026, 4:29:19 PM 7/3/2026, 4:29:20 PM
