Intro to Power Engineering/Codes and
Standards Knowledge Check Exam
2025 Questions and Answers
What is the minimum inside diameter for a manhole which is required on a pressure vessel? -
CORRECT ANSWER✔️✔️-406mm
A Power Engineer's Certificate is required to be: - CORRECT ANSWER✔️✔️-posted or hung in
a conspicuous place on the premises
When applying to write a Power Engineering Certificate of Competency examination, the candidate,
when applicable, may have to: - CORRECT ANSWER✔️✔️-be in possession of the next lower
class of certificate
A Fourth Class Power Engineer's certificate of competency qualifies the holder to take charge of a
shift in a power plant having a capacity of not more than ______________ kW, as a shift engineer. -
CORRECT ANSWER✔️✔️-5000kw
Expected conduct during an examination for a certificate of competency is stated in: - CORRECT
ANSWER✔️✔️-power engineers regulations
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 1
, Which of the following is required in order to progress from the 4th class certificate to the 3rd class?
- CORRECT ANSWER✔️✔️-pass the third class exam and have the required experience
Which of the following certificates of competency qualifies the holder to take charge of the general
care and operation of any power plant as chief steam engineer, and to supervise the engineers in that
plant and take charge of a shift in any power plant as shift engineer? - CORRECT
ANSWER✔️✔️-first class engineers certificate of competence
Unqualified individuals operating a power plant or pressure plant risk the ____ of the plant and the
general public. - CORRECT ANSWER✔️✔️-safety
You have a valve, gauge, regulator, and a flange. What are these known as per the Power Engineers
Regulation? - CORRECT ANSWER✔️✔️-fittings
According to the Power Engineers Regulation, a "power plant" is: - CORRECT ANSWER✔️✔️-A
boiler in which steam at at pressure exceeding 103 kPa or 121°C is generated
What is the term, according to the Act, that defines any part of the surface of a boiler or thermal
liquid heating system that is in contact with fluid under pressure on side and the products of
combustion on the other side? - CORRECT ANSWER✔️✔️-Heating surface
What would be the correct term for a person possessing the appropriate qualifications, knowledge,
skills & experience to supervise or perform work safely and in accordance with the act? -
CORRECT ANSWER✔️✔️-Competent
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 2
Standards Knowledge Check Exam
2025 Questions and Answers
What is the minimum inside diameter for a manhole which is required on a pressure vessel? -
CORRECT ANSWER✔️✔️-406mm
A Power Engineer's Certificate is required to be: - CORRECT ANSWER✔️✔️-posted or hung in
a conspicuous place on the premises
When applying to write a Power Engineering Certificate of Competency examination, the candidate,
when applicable, may have to: - CORRECT ANSWER✔️✔️-be in possession of the next lower
class of certificate
A Fourth Class Power Engineer's certificate of competency qualifies the holder to take charge of a
shift in a power plant having a capacity of not more than ______________ kW, as a shift engineer. -
CORRECT ANSWER✔️✔️-5000kw
Expected conduct during an examination for a certificate of competency is stated in: - CORRECT
ANSWER✔️✔️-power engineers regulations
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 1
, Which of the following is required in order to progress from the 4th class certificate to the 3rd class?
- CORRECT ANSWER✔️✔️-pass the third class exam and have the required experience
Which of the following certificates of competency qualifies the holder to take charge of the general
care and operation of any power plant as chief steam engineer, and to supervise the engineers in that
plant and take charge of a shift in any power plant as shift engineer? - CORRECT
ANSWER✔️✔️-first class engineers certificate of competence
Unqualified individuals operating a power plant or pressure plant risk the ____ of the plant and the
general public. - CORRECT ANSWER✔️✔️-safety
You have a valve, gauge, regulator, and a flange. What are these known as per the Power Engineers
Regulation? - CORRECT ANSWER✔️✔️-fittings
According to the Power Engineers Regulation, a "power plant" is: - CORRECT ANSWER✔️✔️-A
boiler in which steam at at pressure exceeding 103 kPa or 121°C is generated
What is the term, according to the Act, that defines any part of the surface of a boiler or thermal
liquid heating system that is in contact with fluid under pressure on side and the products of
combustion on the other side? - CORRECT ANSWER✔️✔️-Heating surface
What would be the correct term for a person possessing the appropriate qualifications, knowledge,
skills & experience to supervise or perform work safely and in accordance with the act? -
CORRECT ANSWER✔️✔️-Competent
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 2
