Hers Rater Questions with correct answers
\| \| \| \| \|
What is the primary focus of ANSI/RESNET/ICC 380-2019 - CORRECT
\| \| \| \| \| \| \| \| \| \|
ANSWERS ✔✔Residential dwelling energy testing procedures.
\| \| \| \| \|
What is the primary focus of ANSI/RESNET/ICC 301-2019 - CORRECT
\| \| \| \| \| \| \| \| \| \|
ANSWERS ✔✔Method to evaluate rated dwelling vs reference dwelling.
\| \| \| \| \| \| \| \|
Air moves from areas of __________ pressure to areas of _________
\| \| \| \| \| \| \| \| \| \| \|
pressure. - CORRECT ANSWERS ✔✔High/Lower
\| \| \| \|
Heat moves from areas of __________ temperature to areas of _________
\| \| \| \| \| \| \| \| \| \| \|
temperature. - CORRECT ANSWERS ✔✔Warm, colder \| \| \| \| \|
Name the three methods of heat transfer. - CORRECT ANSWERS
\| \| \| \| \| \| \| \| \| \|
✔✔Conduction, convection, radiation \| \|
A ___________ temperature difference between the two objects will have a
\| \| \| \| \| \| \| \| \| \| \|
______ amount of heat transfer. - CORRECT ANSWERS ✔✔Larger, greater
\| \| \| \| \| \| \| \| \|
True/False. For conduction to occur the two materials must be in direct
\| \| \| \| \| \| \| \| \| \| \| \|
contact - CORRECT ANSWERS ✔✔True
\| \| \| \|
, Convection is airflow caused by _________ differences and therefore \| \| \| \| \| \| \| \| \|
________ differences. - CORRECT ANSWERS ✔✔Temperature, air density
\| \| \| \| \| \| \|
True/False. Radiation requires a medium between two objects for heat\| \| \| \| \| \| \| \| \| \|
transfer to take place. - CORRECT ANSWERS ✔✔False
\| \| \| \| \| \| \|
Dry bulb temperature is ________ heat and is measured by a ___________. -
\| \| \| \| \| \| \| \| \| \| \| \| \|
CORRECT ANSWERS ✔✔Sensible, thermometer \| \| \|
Wet bulb temperature can be measured with a _______________. - CORRECT
\| \| \| \| \| \| \| \| \| \| \|
ANSWERS ✔✔Sling psychrometer \| \|
A BTU is the amount of heat required to raise one (1) _________ of water ___
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|
degree F. - CORRECT ANSWERS ✔✔Pound, 1
\| \| \| \| \| \|
One (1) kilowatt hr (kw/hr) equals _________ watts and __________ BTUs. -
\| \| \| \| \| \| \| \| \| \| \| \|
CORRECT ANSWERS ✔✔1000, 3,412 \| \| \|
If an object absorbs 25% and transmits 35% what % does it reflect?. -
\| \| \| \| \| \| \| \| \| \| \| \| \| \|
CORRECT ANSWERS ✔✔40% \| \|
CFM is an acronym for __________. - CORRECT ANSWERS ✔✔Cubic feet
\| \| \| \| \| \| \| \| \| \| \|
minute
_____ CFM that leaks out of a dwelling must be replaced by ________ CFM
\| \| \| \| \| \| \| \| \| \| \| \| \| \|
entering the dwelling. - CORRECT ANSWERS ✔✔One (1), one (1)
\| \| \| \| \| \| \| \| \|
\| \| \| \| \|
What is the primary focus of ANSI/RESNET/ICC 380-2019 - CORRECT
\| \| \| \| \| \| \| \| \| \|
ANSWERS ✔✔Residential dwelling energy testing procedures.
\| \| \| \| \|
What is the primary focus of ANSI/RESNET/ICC 301-2019 - CORRECT
\| \| \| \| \| \| \| \| \| \|
ANSWERS ✔✔Method to evaluate rated dwelling vs reference dwelling.
\| \| \| \| \| \| \| \|
Air moves from areas of __________ pressure to areas of _________
\| \| \| \| \| \| \| \| \| \| \|
pressure. - CORRECT ANSWERS ✔✔High/Lower
\| \| \| \|
Heat moves from areas of __________ temperature to areas of _________
\| \| \| \| \| \| \| \| \| \| \|
temperature. - CORRECT ANSWERS ✔✔Warm, colder \| \| \| \| \|
Name the three methods of heat transfer. - CORRECT ANSWERS
\| \| \| \| \| \| \| \| \| \|
✔✔Conduction, convection, radiation \| \|
A ___________ temperature difference between the two objects will have a
\| \| \| \| \| \| \| \| \| \| \|
______ amount of heat transfer. - CORRECT ANSWERS ✔✔Larger, greater
\| \| \| \| \| \| \| \| \|
True/False. For conduction to occur the two materials must be in direct
\| \| \| \| \| \| \| \| \| \| \| \|
contact - CORRECT ANSWERS ✔✔True
\| \| \| \|
, Convection is airflow caused by _________ differences and therefore \| \| \| \| \| \| \| \| \|
________ differences. - CORRECT ANSWERS ✔✔Temperature, air density
\| \| \| \| \| \| \|
True/False. Radiation requires a medium between two objects for heat\| \| \| \| \| \| \| \| \| \|
transfer to take place. - CORRECT ANSWERS ✔✔False
\| \| \| \| \| \| \|
Dry bulb temperature is ________ heat and is measured by a ___________. -
\| \| \| \| \| \| \| \| \| \| \| \| \|
CORRECT ANSWERS ✔✔Sensible, thermometer \| \| \|
Wet bulb temperature can be measured with a _______________. - CORRECT
\| \| \| \| \| \| \| \| \| \| \|
ANSWERS ✔✔Sling psychrometer \| \|
A BTU is the amount of heat required to raise one (1) _________ of water ___
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|
degree F. - CORRECT ANSWERS ✔✔Pound, 1
\| \| \| \| \| \|
One (1) kilowatt hr (kw/hr) equals _________ watts and __________ BTUs. -
\| \| \| \| \| \| \| \| \| \| \| \|
CORRECT ANSWERS ✔✔1000, 3,412 \| \| \|
If an object absorbs 25% and transmits 35% what % does it reflect?. -
\| \| \| \| \| \| \| \| \| \| \| \| \| \|
CORRECT ANSWERS ✔✔40% \| \|
CFM is an acronym for __________. - CORRECT ANSWERS ✔✔Cubic feet
\| \| \| \| \| \| \| \| \| \| \|
minute
_____ CFM that leaks out of a dwelling must be replaced by ________ CFM
\| \| \| \| \| \| \| \| \| \| \| \| \| \|
entering the dwelling. - CORRECT ANSWERS ✔✔One (1), one (1)
\| \| \| \| \| \| \| \| \|
