5/30/25, 10:14 AM CWB Level 2 Closed Book EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE) (MULTIPLE CHOICES) A+ GRADED…
CWB Level 2 Closed Book EXAM QUESTIONS
WITH COMPLETE SOLUTION GUIDE) (MULTIPLE
CHOICES) A+ GRADED 100% VERIFIED
Save
Terms in this set (25)
To measure the strength a) A transverse weld tension test.
of a welded joint what
mechanical test would
you prescribe?
a) A transverse weld
tension test.
b) A charpy test.
c) A CTOD test.
d) An all weld metal
tension test.
e) A side bend test.
Select the cutting e) Laser beam cutting
process that would
provide the narrowest
heat affected zone when
cutting 12.5 mm (0.5 in)
thick carbon steel.
a) Oxy-acetylene cutting.
b) Air-carbon arc cutting.
c) Oxy-propane cutting.
d) Plasma arc cutting.
e) Laser beam cutting
https://quizlet.com/1049639771/cwb-level-2-closed-book-exam-questions-with-complete-solution-guide-multiple-choices-a-graded-100-verified-fl… 1/10
, 5/30/25, 10:14 AM CWB Level 2 Closed Book EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE) (MULTIPLE CHOICES) A+ GRADED…
Which of the following b) 2G
refers to a welder test
where a pipe assembly is
placed vertically and the
joint welded in the
horizontal position
without rotating the
assembly?
a) 1G
b) 2G
c) 3G
d) 5G
e) 6G
Which of the following b) Crack.
imperfections is normally
considered as
unacceptable regardless
of size or location?
a) Porosity.
b) Crack.
c) Inadequate
penetration.
d) Lamination.
e) Burn-through.
Select the correct c) 0.025 in.
penetrameter thickness
for 2% sensitivity when
radiographing a
weldment 1.25 inches in
thickness.
a) 0.012 in.
b) 0.015 in.
c) 0.025 in.
d) 0.030 in.
https://quizlet.com/1049639771/cwb-level-2-closed-book-exam-questions-with-complete-solution-guide-multiple-choices-a-graded-100-verified-fl… 2/10
CWB Level 2 Closed Book EXAM QUESTIONS
WITH COMPLETE SOLUTION GUIDE) (MULTIPLE
CHOICES) A+ GRADED 100% VERIFIED
Save
Terms in this set (25)
To measure the strength a) A transverse weld tension test.
of a welded joint what
mechanical test would
you prescribe?
a) A transverse weld
tension test.
b) A charpy test.
c) A CTOD test.
d) An all weld metal
tension test.
e) A side bend test.
Select the cutting e) Laser beam cutting
process that would
provide the narrowest
heat affected zone when
cutting 12.5 mm (0.5 in)
thick carbon steel.
a) Oxy-acetylene cutting.
b) Air-carbon arc cutting.
c) Oxy-propane cutting.
d) Plasma arc cutting.
e) Laser beam cutting
https://quizlet.com/1049639771/cwb-level-2-closed-book-exam-questions-with-complete-solution-guide-multiple-choices-a-graded-100-verified-fl… 1/10
, 5/30/25, 10:14 AM CWB Level 2 Closed Book EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE) (MULTIPLE CHOICES) A+ GRADED…
Which of the following b) 2G
refers to a welder test
where a pipe assembly is
placed vertically and the
joint welded in the
horizontal position
without rotating the
assembly?
a) 1G
b) 2G
c) 3G
d) 5G
e) 6G
Which of the following b) Crack.
imperfections is normally
considered as
unacceptable regardless
of size or location?
a) Porosity.
b) Crack.
c) Inadequate
penetration.
d) Lamination.
e) Burn-through.
Select the correct c) 0.025 in.
penetrameter thickness
for 2% sensitivity when
radiographing a
weldment 1.25 inches in
thickness.
a) 0.012 in.
b) 0.015 in.
c) 0.025 in.
d) 0.030 in.
https://quizlet.com/1049639771/cwb-level-2-closed-book-exam-questions-with-complete-solution-guide-multiple-choices-a-graded-100-verified-fl… 2/10
