Auvik Cert Exam Latest Update 2025-2026 60
Questions and 100% Verified Correct Answers
Guaranteed A+
A switch is reporting its make and model is Cisco, but instead if a switch its saying a
Generic device. What could be the reason for the deice showing as generic? -
CORRECT ANSWER: - Auvik does not have the right community string for the device.
- SNMP is not enabled on this device
- this is a device auvik has never seen before
An alert can have multiple notification channels. - CORRECT ANSWER: - True
An alert has the following text in the description field: The RAM module
'$compenentINDEX' within device $deviceName is in a degraded state. what does the
"$componentindex" do? - CORRECT ANSWER: - it is a variable. this means that when
the alert is fires this text will be replaced with the device component index.
Auvik can automatically resolves alerts when the problem clears itself according to the
set threshold. - CORRECT ANSWER: - True
Auvik only allows you to scan or not scan entire subnet. Currently there is no way more
granularly control which devices auvik pulls information. - CORRECT ANSWER: - False
Choose the correct connection type ( black lines ) based on this picture. - CORRECT
ANSWER: - Layer 3, logical IP to IP. Inferred Connections
, Choose the correct connection type ( blue lines ) based on this picture. - CORRECT
ANSWER: - layer 1, physical connection between two devices
How could you setup your alerts so that critical alerts go to all technicians, but warning
alerts only go to lvl 1 and lvl 2 techs? - CORRECT ANSWER: - set critical alerts to go to
PSA that all techs can see or get sent to a company wide email address. Then set
warning alerts to only notify lvl1 & lvl2 techs via group email.
How do your prevent a user from accessing a sites remote terminal? - CORRECT
ANSWER: - through the auviks role based permissions.
If a subnet is missing from the manage Network list, what should you try first? -
CORRECT ANSWER: - Manually add it in the manage network menu
If alerts become repetitive, it is always best practice to first change the trigger conditions
for these alerts. - CORRECT ANSWER: - False
If no notification channel is set for an alert, then the alert will never trigger? - CORRECT
ANSWER: - False
If you wanted to dedicate a piece of hardware to being auvik collector machine, what
kind of device could you use? - CORRECT ANSWER: - Home theater PC or similar
specced PC
- Intel NUC
- Old workstations
in which of the following cases would you use a multi-client (multi-site) instead of a
client (site) when adding a new customer or contract to Auvik? - CORRECT ANSWER: -
Questions and 100% Verified Correct Answers
Guaranteed A+
A switch is reporting its make and model is Cisco, but instead if a switch its saying a
Generic device. What could be the reason for the deice showing as generic? -
CORRECT ANSWER: - Auvik does not have the right community string for the device.
- SNMP is not enabled on this device
- this is a device auvik has never seen before
An alert can have multiple notification channels. - CORRECT ANSWER: - True
An alert has the following text in the description field: The RAM module
'$compenentINDEX' within device $deviceName is in a degraded state. what does the
"$componentindex" do? - CORRECT ANSWER: - it is a variable. this means that when
the alert is fires this text will be replaced with the device component index.
Auvik can automatically resolves alerts when the problem clears itself according to the
set threshold. - CORRECT ANSWER: - True
Auvik only allows you to scan or not scan entire subnet. Currently there is no way more
granularly control which devices auvik pulls information. - CORRECT ANSWER: - False
Choose the correct connection type ( black lines ) based on this picture. - CORRECT
ANSWER: - Layer 3, logical IP to IP. Inferred Connections
, Choose the correct connection type ( blue lines ) based on this picture. - CORRECT
ANSWER: - layer 1, physical connection between two devices
How could you setup your alerts so that critical alerts go to all technicians, but warning
alerts only go to lvl 1 and lvl 2 techs? - CORRECT ANSWER: - set critical alerts to go to
PSA that all techs can see or get sent to a company wide email address. Then set
warning alerts to only notify lvl1 & lvl2 techs via group email.
How do your prevent a user from accessing a sites remote terminal? - CORRECT
ANSWER: - through the auviks role based permissions.
If a subnet is missing from the manage Network list, what should you try first? -
CORRECT ANSWER: - Manually add it in the manage network menu
If alerts become repetitive, it is always best practice to first change the trigger conditions
for these alerts. - CORRECT ANSWER: - False
If no notification channel is set for an alert, then the alert will never trigger? - CORRECT
ANSWER: - False
If you wanted to dedicate a piece of hardware to being auvik collector machine, what
kind of device could you use? - CORRECT ANSWER: - Home theater PC or similar
specced PC
- Intel NUC
- Old workstations
in which of the following cases would you use a multi-client (multi-site) instead of a
client (site) when adding a new customer or contract to Auvik? - CORRECT ANSWER: -
