NCCCO TSS MANITEX ACTUAL EXAM COMPLETE
ACCURATE EXAM QUESTIONS WITH DETAILED
VERIFIED ANSWERS (100% CORRECT ANSWERS)
Guaranteed Pass!!
1. Where is the best place to level a crane? - ANSWER Upper works
2. What are the industry standards that cover mobile cranes? - ANSWER
OSHA 1926.1400 and ASME B30.5
3. In rotation resistant rope, if you have _____ broken wires and six rope
diameter and ______ In 30 rope diameters, the rope must be removed from
service. - ANSWER 2,4
4. And standard rope if you have _____ broken wires randomly distributed in a
rope lay and ________ broken wires in a strand in a Lay It must be removed
from service. - ANSWER 6,3
5. When picking off the main boom, what determines the unused jib
deduction? - ANSWER The effective weight of the jib
6. Setting up a mobile crane with long boom on uneven ground, what support
condition should be considered? - ANSWER Keeping it 90° between
cylinder rod and the pad
,7. How should the tires be positioned when setting up a crane on outriggers? -
ANSWER All tires relieved of the cranes weight or preferably off the
ground
8. Who is responsible for determining the weight of the load? - ANSWER
Lift Director
9. A DOT Medical card normally is good for a period of how many years? -
ANSWER Two years
10.Upon arriving on site, the lift Director observed ground conditions are not
suitable for safe crane operations, they should contact: - ANSWER
Controlling entity
11.A _______ should decide the rigging points for an engineered lift are
appropriate to ensure a safe lift: - ANSWER Qualified person
12.The _______Shall ensure a qualified person has been designated lift
Director: - ANSWER Site supervisor
13.The _______ shall determine powerline proximities: - ANSWER Site
supervisor
14.When is it OK to use a swivel on rotation resistant wire rope? - ANSWER
If manufacturer approves
, 15.What should be done by the crane operator if the LMI malfunctions? -
ANSWER Stop crane operations and report it to the supervisor
16.Can a crane lifting capacity be lower than its net capacity? - ANSWER
Yes
17.What should be done if the operator cannot see the outriggers for
extension? - ANSWER Use a signal person
18.Name The three ways that two blocking can occur? - ANSWER
extending boom, hoisting or lowering the boom
19.According to ASME Be 30.5 where should a portable fire extinguisher shall
be installed? - ANSWER In the cab or at the machinery housing
20.Where should the tools be kept on a crane when they're not being used? -
ANSWER Toolbox
21.When replacing a wire rope on a crane you should always come off the: -
ANSWER Top of the reel to the top of the drum
22.To prevent wire rope from coming off the drum, the flange must remain at
least _____ inches above the top layer - ANSWER 1/2
ACCURATE EXAM QUESTIONS WITH DETAILED
VERIFIED ANSWERS (100% CORRECT ANSWERS)
Guaranteed Pass!!
1. Where is the best place to level a crane? - ANSWER Upper works
2. What are the industry standards that cover mobile cranes? - ANSWER
OSHA 1926.1400 and ASME B30.5
3. In rotation resistant rope, if you have _____ broken wires and six rope
diameter and ______ In 30 rope diameters, the rope must be removed from
service. - ANSWER 2,4
4. And standard rope if you have _____ broken wires randomly distributed in a
rope lay and ________ broken wires in a strand in a Lay It must be removed
from service. - ANSWER 6,3
5. When picking off the main boom, what determines the unused jib
deduction? - ANSWER The effective weight of the jib
6. Setting up a mobile crane with long boom on uneven ground, what support
condition should be considered? - ANSWER Keeping it 90° between
cylinder rod and the pad
,7. How should the tires be positioned when setting up a crane on outriggers? -
ANSWER All tires relieved of the cranes weight or preferably off the
ground
8. Who is responsible for determining the weight of the load? - ANSWER
Lift Director
9. A DOT Medical card normally is good for a period of how many years? -
ANSWER Two years
10.Upon arriving on site, the lift Director observed ground conditions are not
suitable for safe crane operations, they should contact: - ANSWER
Controlling entity
11.A _______ should decide the rigging points for an engineered lift are
appropriate to ensure a safe lift: - ANSWER Qualified person
12.The _______Shall ensure a qualified person has been designated lift
Director: - ANSWER Site supervisor
13.The _______ shall determine powerline proximities: - ANSWER Site
supervisor
14.When is it OK to use a swivel on rotation resistant wire rope? - ANSWER
If manufacturer approves
, 15.What should be done by the crane operator if the LMI malfunctions? -
ANSWER Stop crane operations and report it to the supervisor
16.Can a crane lifting capacity be lower than its net capacity? - ANSWER
Yes
17.What should be done if the operator cannot see the outriggers for
extension? - ANSWER Use a signal person
18.Name The three ways that two blocking can occur? - ANSWER
extending boom, hoisting or lowering the boom
19.According to ASME Be 30.5 where should a portable fire extinguisher shall
be installed? - ANSWER In the cab or at the machinery housing
20.Where should the tools be kept on a crane when they're not being used? -
ANSWER Toolbox
21.When replacing a wire rope on a crane you should always come off the: -
ANSWER Top of the reel to the top of the drum
22.To prevent wire rope from coming off the drum, the flange must remain at
least _____ inches above the top layer - ANSWER 1/2
