©THESTAR 2025 ALL RIGHTS RESERVED
CCNA 1 FINAL EXAM QUESTIONS AND
ANSWERS 100% PASS
Refer to the exhibit. Which two network addresses can be assigned to the network containing
10 hosts? Your answers should waste the fewest addresses, not reuse addresses that are
already assigned, and stay within the 10.18.10.0/24 range of addresses. (Choose two.)
10.18.10.200/28
10.18.10.208/28
10.18.10.240/27
10.18.10.200/27
10.18.10.224/27
10.18.10.224/28 - ANS 10.18.10.224/28
10.18.10.208/28
What are two functions that are provided by the network layer? (Choose two.)
directing data packets to destination hosts on other networks
placing data on the network medium
carrying data between processes that are running on source and destination hosts
providing dedicated end-to-end connections
providing end devices with a unique network identifier - ANS providing end devices with a
unique network identifier
directing data packets to destination hosts on other networks
, ©THESTAR 2025 ALL RIGHTS RESERVED
What two ICMPv6 message types must be permitted through IPv6 access control lists to allow
resolution of Layer 3 addresses to Layer 2 MAC addresses? (Choose two.)
neighbor solicitations
echo requests
neighbor advertisements
echo replies
router solicitations
router advertisements - ANS neighbor solicitations
neighbor advertisements
Which range of link-local addresses can be assigned to an IPv6-enabled interface?
FEC0::/10
FDEE::/7
FE80::/10
FF00::/8 - ANS FE80::/10
What would be the interface ID of an IPv6 enabled interface with a MAC address of 1C-6F-65-
C2-BD-F8 when the interface ID is generated by using the EUI-64 process?
0C6F:65FF:FEC2:BDF8
1E6F:65FF:FEC2:BDF8
C16F:65FF:FEC2:BDF8
106F:65FF:FEC2:BDF8 - ANS 1E6F:65FF:FEC2:BDF8
An organization is assigned an IPv6 address block of 2001:db8:0:ca00::/56. How many subnets
can be created without using bits in the interface ID space?
256
512
, ©THESTAR 2025 ALL RIGHTS RESERVED
1024
4096 - ANS 256
Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be
in the frame when it leaves host A?
DD:DD:DD:DD:DD:DD
172.168.10.99
CC:CC:CC:CC:CC:CC
172.168.10.65
BB:BB:BB:BB:BB:BB
AA:AA:AA:AA:AA:AA - ANS BB:BB:BB:BB:BB:BB
When a switch configuration includes a user-defined error threshold on a per-port basis, to
which switching method will the switch revert when the error threshold is reached?
cut-through
store-and-forward
fast-forward
fragment-free - ANS store-and-forward
Which two statements are correct about MAC and IP addresses during data transmission if NAT
is not involved? (Choose two.)
Destination IP addresses in a packet header remain constant along the entire path to a target
host.
Destination MAC addresses will never change in a frame that goes across seven routers.
Every time a frame is encapsulated with a new destination MAC address, a new destination IP
address is needed.
Destination and source MAC addresses have local significance and change every time a frame
goes from one LAN to another.
, ©THESTAR 2025 ALL RIGHTS RESERVED
A packet that has crossed four routers has changed the destination IP address four times. -
ANS Destination IP addresses in a packet header remain constant along the entire path to a
target host.
Destination and source MAC addresses have local significance and change every time a frame
goes from one LAN to another.
What is one main characteristic of the data link layer?
It generates the electrical or optical signals that represent the 1 and 0 on the media.
It converts a stream of data bits into a predefined code.
It shields the upper layer protocol from being aware of the physical medium to be used in the
communication.
It accepts Layer 3 packets and decides the path by which to forward the packet to a remote
network. - ANS It shields the upper layer protocol from being aware of the physical medium
to be used in the communication.
What are three characteristics of the CSMA/CD process? (Choose three.)
The device with the electronic token is the only one that can transmit after a collision.
A device listens and waits until the media is not busy before transmitting.
After detecting a collision, hosts can attempt to resume transmission after a random time delay
has expired.
All of the devices on a segment see data that passes on the network medium.
A jam signal indicates that the collision has cleared and the media is not busy.
Devices can be configured with a higher transmission priority. - ANS A device listens and
waits until the media is not busy before transmitting.
After detecting a collision, hosts can attempt to resume transmission after a random time delay
has expired.
All of the devices on a segment see data that passes on the network medium.
What are two primary responsibilities of the Ethernet MAC sublayer? (Choose two.)
error detection
CCNA 1 FINAL EXAM QUESTIONS AND
ANSWERS 100% PASS
Refer to the exhibit. Which two network addresses can be assigned to the network containing
10 hosts? Your answers should waste the fewest addresses, not reuse addresses that are
already assigned, and stay within the 10.18.10.0/24 range of addresses. (Choose two.)
10.18.10.200/28
10.18.10.208/28
10.18.10.240/27
10.18.10.200/27
10.18.10.224/27
10.18.10.224/28 - ANS 10.18.10.224/28
10.18.10.208/28
What are two functions that are provided by the network layer? (Choose two.)
directing data packets to destination hosts on other networks
placing data on the network medium
carrying data between processes that are running on source and destination hosts
providing dedicated end-to-end connections
providing end devices with a unique network identifier - ANS providing end devices with a
unique network identifier
directing data packets to destination hosts on other networks
, ©THESTAR 2025 ALL RIGHTS RESERVED
What two ICMPv6 message types must be permitted through IPv6 access control lists to allow
resolution of Layer 3 addresses to Layer 2 MAC addresses? (Choose two.)
neighbor solicitations
echo requests
neighbor advertisements
echo replies
router solicitations
router advertisements - ANS neighbor solicitations
neighbor advertisements
Which range of link-local addresses can be assigned to an IPv6-enabled interface?
FEC0::/10
FDEE::/7
FE80::/10
FF00::/8 - ANS FE80::/10
What would be the interface ID of an IPv6 enabled interface with a MAC address of 1C-6F-65-
C2-BD-F8 when the interface ID is generated by using the EUI-64 process?
0C6F:65FF:FEC2:BDF8
1E6F:65FF:FEC2:BDF8
C16F:65FF:FEC2:BDF8
106F:65FF:FEC2:BDF8 - ANS 1E6F:65FF:FEC2:BDF8
An organization is assigned an IPv6 address block of 2001:db8:0:ca00::/56. How many subnets
can be created without using bits in the interface ID space?
256
512
, ©THESTAR 2025 ALL RIGHTS RESERVED
1024
4096 - ANS 256
Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be
in the frame when it leaves host A?
DD:DD:DD:DD:DD:DD
172.168.10.99
CC:CC:CC:CC:CC:CC
172.168.10.65
BB:BB:BB:BB:BB:BB
AA:AA:AA:AA:AA:AA - ANS BB:BB:BB:BB:BB:BB
When a switch configuration includes a user-defined error threshold on a per-port basis, to
which switching method will the switch revert when the error threshold is reached?
cut-through
store-and-forward
fast-forward
fragment-free - ANS store-and-forward
Which two statements are correct about MAC and IP addresses during data transmission if NAT
is not involved? (Choose two.)
Destination IP addresses in a packet header remain constant along the entire path to a target
host.
Destination MAC addresses will never change in a frame that goes across seven routers.
Every time a frame is encapsulated with a new destination MAC address, a new destination IP
address is needed.
Destination and source MAC addresses have local significance and change every time a frame
goes from one LAN to another.
, ©THESTAR 2025 ALL RIGHTS RESERVED
A packet that has crossed four routers has changed the destination IP address four times. -
ANS Destination IP addresses in a packet header remain constant along the entire path to a
target host.
Destination and source MAC addresses have local significance and change every time a frame
goes from one LAN to another.
What is one main characteristic of the data link layer?
It generates the electrical or optical signals that represent the 1 and 0 on the media.
It converts a stream of data bits into a predefined code.
It shields the upper layer protocol from being aware of the physical medium to be used in the
communication.
It accepts Layer 3 packets and decides the path by which to forward the packet to a remote
network. - ANS It shields the upper layer protocol from being aware of the physical medium
to be used in the communication.
What are three characteristics of the CSMA/CD process? (Choose three.)
The device with the electronic token is the only one that can transmit after a collision.
A device listens and waits until the media is not busy before transmitting.
After detecting a collision, hosts can attempt to resume transmission after a random time delay
has expired.
All of the devices on a segment see data that passes on the network medium.
A jam signal indicates that the collision has cleared and the media is not busy.
Devices can be configured with a higher transmission priority. - ANS A device listens and
waits until the media is not busy before transmitting.
After detecting a collision, hosts can attempt to resume transmission after a random time delay
has expired.
All of the devices on a segment see data that passes on the network medium.
What are two primary responsibilities of the Ethernet MAC sublayer? (Choose two.)
error detection
