NIMS Core Machining Skills 121
Air Nozzle - ANS-A tool used to spray air. Air nozzles can be utilized by an operator to eliminate
chips from inside a CNC device.
Bore - ANS-A unmarried-factor slicing device used to amplify a preexisting hole. Boring, which
may be performed on either a lathe or a mill, facilitates create a concentric hollow that meets
tight tolerances.
Brix Scale - ANS-A gadget used for measuring the awareness of a substance that has been
mixed with water. The Brix scale is used along with a refractometer to determine the awareness
of a fluid.
Burr - ANS-A difficult part closing on cloth, such as metal, after it has been machined. Burrs
ought to be eliminated during finishing strategies to improve the capability and appearance of a
component.
Calibration - ANS-The contrast and adjustment of a device with unknown accuracy to a tool with
a known, accurate popular. Calibration gets rid of any version in the tool being checked.
Carriage - ANS-The section of the lathe that slides to and fro longitudinally alongside the
methods. The carriage supports the move-slide and slicing device.
Chip - ANS-An undesirable piece of metal this is removed from a workpiece. Chips are
fashioned whilst a tool cuts or grinds metal.
Chip Auger - ANS-A rotating shaft with a helical blade that removes chips from the device. The
chips auger's automated elimination of chips from the factor of operation reduces the hazard of
damage because operators do not need to get rid of the chips with the aid of hand.
Chip Guard - ANS-A plastic guard that covers the point of operation. A chip shield prevents
flying chips from contacting the operator.
Chuck - ANS-A tool that holds a workpiece in vicinity as it rotates on a lathe or different system.
The chuck normally has , 3, or four jaws that may be adjusted to in shape diverse workpieces.
Chuck Key - ANS-A device used to loosen or tighten a chuck. A chuck key should be removed
from the chuck before starting a machine.
Clamps - ANS-A workholding device that grips and holds a workpiece in region. Clamps may be
used whilst machining with a mill.
, CNC Machines - ANS-pc numerical control system. A system tool controlled by using a pc going
for walks packages pushed through numerical statistics. Most CNC machines are enclosed.
Combustible - ANS-Capable of igniting and burning. Combustible beverages require unique
garage and labeling.
Computer Numerical Control Machine - ANS-CNC system. A system device controlled via a pc
strolling applications driven by numerical records. Most CNC machines are enclosed.
Concentrate - ANS-The chemical aggregate that is diluted with water to create a appropriate
reducing fluid. Concentrate must be checked regularly to make certain optimal cutting fluid
performance.
Conveyor Belt - ANS-A moveable belt used in enterprise to move substances over a distance.
For steel slicing protection purposes, conveyor belts help remove sharp chips from a system
tool.
Coolant - ANS-A reducing fluid used to decrease the temperature of the device and the
workpiece. Coolant can incorporate oil, water, or synthetics.
Cover Plate - ANS-A hinged lid on a refractometer that covers the prism surface. The cowl plate
is obvious to permit light into the tool.
Cutting Fluid - ANS-A liquid used for the duration of slicing operations to reduce warmth and
friction between the slicing device and the workpiece. Cutting fluid may additionally include oil or
other flammable liquids and is a ability hearth hazard if disposed of improperly.
Cutting Tool - ANS-A device with one or extra reducing edges designed to have interaction a
workpiece and do away with material within the shape of chips. Cutting gear ideally showcase
great hardness, sturdiness, and put on resistance.
Deburring - ANS-Removing sharp projections left on a workpiece after a machining or grinding
operation. Deburring is frequently carried out by means of hand or by robotic the usage of
coated abrasives.
Drill - ANS-A multi-point reducing device used to make spherical holes. In drilling, either the
workpiece is held desk bound whilst the drill rotates to cut a hole to a positive depth, or the drill
is held stationary even as the workpiece rotates.
Drill Chuck - ANS-A form of toolholder that holds drill bits in a machine tool, consisting of a
lathe, mill, or drill press. A drill chuck has jaws and a collar which are tighted to grip a drill bit.
Air Nozzle - ANS-A tool used to spray air. Air nozzles can be utilized by an operator to eliminate
chips from inside a CNC device.
Bore - ANS-A unmarried-factor slicing device used to amplify a preexisting hole. Boring, which
may be performed on either a lathe or a mill, facilitates create a concentric hollow that meets
tight tolerances.
Brix Scale - ANS-A gadget used for measuring the awareness of a substance that has been
mixed with water. The Brix scale is used along with a refractometer to determine the awareness
of a fluid.
Burr - ANS-A difficult part closing on cloth, such as metal, after it has been machined. Burrs
ought to be eliminated during finishing strategies to improve the capability and appearance of a
component.
Calibration - ANS-The contrast and adjustment of a device with unknown accuracy to a tool with
a known, accurate popular. Calibration gets rid of any version in the tool being checked.
Carriage - ANS-The section of the lathe that slides to and fro longitudinally alongside the
methods. The carriage supports the move-slide and slicing device.
Chip - ANS-An undesirable piece of metal this is removed from a workpiece. Chips are
fashioned whilst a tool cuts or grinds metal.
Chip Auger - ANS-A rotating shaft with a helical blade that removes chips from the device. The
chips auger's automated elimination of chips from the factor of operation reduces the hazard of
damage because operators do not need to get rid of the chips with the aid of hand.
Chip Guard - ANS-A plastic guard that covers the point of operation. A chip shield prevents
flying chips from contacting the operator.
Chuck - ANS-A tool that holds a workpiece in vicinity as it rotates on a lathe or different system.
The chuck normally has , 3, or four jaws that may be adjusted to in shape diverse workpieces.
Chuck Key - ANS-A device used to loosen or tighten a chuck. A chuck key should be removed
from the chuck before starting a machine.
Clamps - ANS-A workholding device that grips and holds a workpiece in region. Clamps may be
used whilst machining with a mill.
, CNC Machines - ANS-pc numerical control system. A system tool controlled by using a pc going
for walks packages pushed through numerical statistics. Most CNC machines are enclosed.
Combustible - ANS-Capable of igniting and burning. Combustible beverages require unique
garage and labeling.
Computer Numerical Control Machine - ANS-CNC system. A system device controlled via a pc
strolling applications driven by numerical records. Most CNC machines are enclosed.
Concentrate - ANS-The chemical aggregate that is diluted with water to create a appropriate
reducing fluid. Concentrate must be checked regularly to make certain optimal cutting fluid
performance.
Conveyor Belt - ANS-A moveable belt used in enterprise to move substances over a distance.
For steel slicing protection purposes, conveyor belts help remove sharp chips from a system
tool.
Coolant - ANS-A reducing fluid used to decrease the temperature of the device and the
workpiece. Coolant can incorporate oil, water, or synthetics.
Cover Plate - ANS-A hinged lid on a refractometer that covers the prism surface. The cowl plate
is obvious to permit light into the tool.
Cutting Fluid - ANS-A liquid used for the duration of slicing operations to reduce warmth and
friction between the slicing device and the workpiece. Cutting fluid may additionally include oil or
other flammable liquids and is a ability hearth hazard if disposed of improperly.
Cutting Tool - ANS-A device with one or extra reducing edges designed to have interaction a
workpiece and do away with material within the shape of chips. Cutting gear ideally showcase
great hardness, sturdiness, and put on resistance.
Deburring - ANS-Removing sharp projections left on a workpiece after a machining or grinding
operation. Deburring is frequently carried out by means of hand or by robotic the usage of
coated abrasives.
Drill - ANS-A multi-point reducing device used to make spherical holes. In drilling, either the
workpiece is held desk bound whilst the drill rotates to cut a hole to a positive depth, or the drill
is held stationary even as the workpiece rotates.
Drill Chuck - ANS-A form of toolholder that holds drill bits in a machine tool, consisting of a
lathe, mill, or drill press. A drill chuck has jaws and a collar which are tighted to grip a drill bit.
