Basic Safety Module 00101 Exam Questions
With All Correct & Verified Answers
Companies with strong safety cultures usually have lower Correct answer-turnover
which of these is a true statement regarding safety? safety is a learned behavior and attitude, safety
is a consciousness comes naturally to most individuals, safety primarily depends on workers in the
field, or safety does not normally require training Correct answer-safety is a learned behavior and
attitude
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of what?
Correct answer-unsafe conditions
the activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a what? Correct answer-safety job analysis
a measure of the probability, consequences, and exposure related to an event is refered to as a ____
Correct answer-risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is
to _____. Correct answer-cover the opening and lable the cover
the D-ring or support point on a safety harness should be placed ____ Correct answer-between the
shoulder blades
a personal fall arrest system should be inspected monthly by a Correct answer-competent person
Lanyards that have no shock-absorbing features are used for _____. Correct answer-positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where the ladder touches the platform or roof by at least Correct answer-3 feet (91
centimeters)
when performing overhead work on scaffolding, what protective measures must be taken to prevent
objects from falling and striking a person below? Correct answer-toeboards, debris nets, or
canopies must be applied
When stacking materials such as bricks or block, do not stack materials beyond a _____. Correct
answer-4:1 height-to-based ratio
Benching systems are prohibited in _____. Correct answer-Type C soils
in the absence of other information, all soil in an excavation should be treated as if its what type of
soil? Correct answer-Type C soil
daily inspection of an excavation must be performed by a Correct answer-competent person
one of the most common grounding systems used for protection against accidental electrical shock is
the Correct answer-three wire system
With All Correct & Verified Answers
Companies with strong safety cultures usually have lower Correct answer-turnover
which of these is a true statement regarding safety? safety is a learned behavior and attitude, safety
is a consciousness comes naturally to most individuals, safety primarily depends on workers in the
field, or safety does not normally require training Correct answer-safety is a learned behavior and
attitude
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of what?
Correct answer-unsafe conditions
the activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a what? Correct answer-safety job analysis
a measure of the probability, consequences, and exposure related to an event is refered to as a ____
Correct answer-risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is
to _____. Correct answer-cover the opening and lable the cover
the D-ring or support point on a safety harness should be placed ____ Correct answer-between the
shoulder blades
a personal fall arrest system should be inspected monthly by a Correct answer-competent person
Lanyards that have no shock-absorbing features are used for _____. Correct answer-positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where the ladder touches the platform or roof by at least Correct answer-3 feet (91
centimeters)
when performing overhead work on scaffolding, what protective measures must be taken to prevent
objects from falling and striking a person below? Correct answer-toeboards, debris nets, or
canopies must be applied
When stacking materials such as bricks or block, do not stack materials beyond a _____. Correct
answer-4:1 height-to-based ratio
Benching systems are prohibited in _____. Correct answer-Type C soils
in the absence of other information, all soil in an excavation should be treated as if its what type of
soil? Correct answer-Type C soil
daily inspection of an excavation must be performed by a Correct answer-competent person
one of the most common grounding systems used for protection against accidental electrical shock is
the Correct answer-three wire system
