FANUC CERTIFICATION TEST REAL EXAM QUESTIONS WITH 100%
RATED CORRECT ANSWERS (ACCURATELY PASSED) 2025 LATEST
UPDATED GET A+
List the Major Axis - (ANSWER)J1, J2, J3
List the Minor Axis - (ANSWER)J4, J5, J6
Identify the Components of the SOP - (ANSWER)1. Fault Reset
2. Cycle Start
3. Fault LED
4. Power LED
5. E-STOP
6. Mode Switch
7. Hour Meter
Which mode limits all cartesian speed to less than 250 mm/sec and joint speed to less than 10%?
- (ANSWER)T1 Mode
Enabling the iPendant gives motion control solely to whom? - (ANSWER)The operator (person
with teach pendant)
Which position must the deadman switch be held to enable motion? - (ANSWER)Centered
Which key combination is needed to access the split screen display menu? - (ANSWER)Shift +
Display
Toggle between quick and full menus requires a password (True/False) - (ANSWER)False
, What key is depressed to switch between the different jog methods? - (ANSWER)COORD
Assuming standard setup, if you jog the robot in World -Y which direction will the TCP move? -
(ANSWER)To the robots right
While jogging the robot you release the shift key, or jog key what will happen? -
(ANSWER)The robot will execute a controlled stop
What must be done prior to executing any type of backup or restore? - (ANSWER)Set the
default device/ verify the correct device is set
What key sequence is depressed and help to access the controlled start screen while powering on
the controller? - (ANSWER)PREV and NEXT
What key sequence is depressed and help to access the BMON screen while powering on the
controller? - (ANSWER)F1 and F5
What type of memory is saved when performing an image backup? - (ANSWER)F-ROM and
SRAM
What type of memory is saved when performing a file backup? - (ANSWER)SRAM Only
When restoring a File Backup. SRAM Files on the controller are overwritten (True/False) -
(ANSWER)True
When restoring an image backup, F-ROM and SRAM files on the controller are erased. (True/
False) - (ANSWER)True
What must be done after setting software axis limits? - (ANSWER)Cycle power
RATED CORRECT ANSWERS (ACCURATELY PASSED) 2025 LATEST
UPDATED GET A+
List the Major Axis - (ANSWER)J1, J2, J3
List the Minor Axis - (ANSWER)J4, J5, J6
Identify the Components of the SOP - (ANSWER)1. Fault Reset
2. Cycle Start
3. Fault LED
4. Power LED
5. E-STOP
6. Mode Switch
7. Hour Meter
Which mode limits all cartesian speed to less than 250 mm/sec and joint speed to less than 10%?
- (ANSWER)T1 Mode
Enabling the iPendant gives motion control solely to whom? - (ANSWER)The operator (person
with teach pendant)
Which position must the deadman switch be held to enable motion? - (ANSWER)Centered
Which key combination is needed to access the split screen display menu? - (ANSWER)Shift +
Display
Toggle between quick and full menus requires a password (True/False) - (ANSWER)False
, What key is depressed to switch between the different jog methods? - (ANSWER)COORD
Assuming standard setup, if you jog the robot in World -Y which direction will the TCP move? -
(ANSWER)To the robots right
While jogging the robot you release the shift key, or jog key what will happen? -
(ANSWER)The robot will execute a controlled stop
What must be done prior to executing any type of backup or restore? - (ANSWER)Set the
default device/ verify the correct device is set
What key sequence is depressed and help to access the controlled start screen while powering on
the controller? - (ANSWER)PREV and NEXT
What key sequence is depressed and help to access the BMON screen while powering on the
controller? - (ANSWER)F1 and F5
What type of memory is saved when performing an image backup? - (ANSWER)F-ROM and
SRAM
What type of memory is saved when performing a file backup? - (ANSWER)SRAM Only
When restoring a File Backup. SRAM Files on the controller are overwritten (True/False) -
(ANSWER)True
When restoring an image backup, F-ROM and SRAM files on the controller are erased. (True/
False) - (ANSWER)True
What must be done after setting software axis limits? - (ANSWER)Cycle power
