FANUC VISIONING REAL EXAM QUESTIONS WITH 100% RATED
CORRECT ANSWERS (ACCURATELY PASSED) 2025 LATEST UPDATED
GET A+
A multiplexer board is required if - (ANSWER)Two or more Sony XC-56 camera are being
used
To use iRVision you need a dedicated computer to constantly monitor the vision system? -
(ANSWER)false
The vision calibration grid is used to: - (ANSWER)Calibrate the camera
The only method for communication between the R-30iB robot and the iRVision computer is: -
(ANSWER)Ethernet
All Dip switched on the camera need to be off after installing to the controller. -
(ANSWER)False
To put in to a controlled start you need to push the following key combinations. -
(ANSWER)PREV and NEXT
You can still use normal networking commands to troubleshoot network. Such as PING
Command. - (ANSWER)True
The iRVision software is pre-installed in the controller and you just need to install it and there is
no need to contact FANUC. - (ANSWER)False
White will result in a greyscale number of what value? - (ANSWER)255
CORRECT ANSWERS (ACCURATELY PASSED) 2025 LATEST UPDATED
GET A+
A multiplexer board is required if - (ANSWER)Two or more Sony XC-56 camera are being
used
To use iRVision you need a dedicated computer to constantly monitor the vision system? -
(ANSWER)false
The vision calibration grid is used to: - (ANSWER)Calibrate the camera
The only method for communication between the R-30iB robot and the iRVision computer is: -
(ANSWER)Ethernet
All Dip switched on the camera need to be off after installing to the controller. -
(ANSWER)False
To put in to a controlled start you need to push the following key combinations. -
(ANSWER)PREV and NEXT
You can still use normal networking commands to troubleshoot network. Such as PING
Command. - (ANSWER)True
The iRVision software is pre-installed in the controller and you just need to install it and there is
no need to contact FANUC. - (ANSWER)False
White will result in a greyscale number of what value? - (ANSWER)255
