1|Page
Cleet Phase 4 Exam 2025 REAL EXAM QUESTIONS
|MOST TESTED QUESTIONS AND CORRECT ANSWERS
|100% ACCURATE|GET IT RIGHT!!
Primary Safety - (answers)A shooters trigger finger is also known as the what?
Positive Target Identification - (answers)Before a shooter fires a round, he or she
must have what?
A firearm that is of sound design, and well maintained - (answers)Before a
shooter enters the firing range, four basic premises must be met. The shooter
must (1) be in sound mental and physical condition; (2) have fresh and safe
ammunition; (3) have a holster that is in good condition and designed specifically
for the firearm; and (4) have what?
Safety - (answers)The TOP PRIORITY of all participants in firearms training is
what?
Loaded - (answers)All firearms should be treated as if they are what?
Revolver - (answers)The proper method of unloading what type of firearm
involves opening the cylinder; ejecting cartridges into your hand; physically and
visually checking the chambers to insure that each is empty; and counting the
rounds in your hand to insure that they are all accounted for?
You check it yourself and confirmed it is unloaded - (answers)You can presume a
firearm is unloaded if what?
, 2|Page
After you have taken position on the firing line and the command to load has
been given by the tower operator. - (answers)When will you first load your
firearm while on the range?
The muzzle has cleared the holster, the muzzle is pointing down range, and the
target has been identified - (answers)Never place your finger on the trigger until
when?
Outside the trigger guard - (answers)Once in the ready gun position, the shooter's
trigger finger should be located where?
Perform the proper malfunction clearance procedure and continue firing -
(answers)In the event of a malfunction in a semi-automatic pistol, you should do
what?
The barrel has been checked for obstructions by a line officer - (answers)Never
fire a succeeding round following a SQUID load until when?
Misfire - (answers)What is the failure of a PRIMER to ignite the powder charge?
Hangfire - (answers)What is the TEMPORARY failure of a primer to ignite the
POWDER charge?
Cleet Phase 4 Exam 2025 REAL EXAM QUESTIONS
|MOST TESTED QUESTIONS AND CORRECT ANSWERS
|100% ACCURATE|GET IT RIGHT!!
Primary Safety - (answers)A shooters trigger finger is also known as the what?
Positive Target Identification - (answers)Before a shooter fires a round, he or she
must have what?
A firearm that is of sound design, and well maintained - (answers)Before a
shooter enters the firing range, four basic premises must be met. The shooter
must (1) be in sound mental and physical condition; (2) have fresh and safe
ammunition; (3) have a holster that is in good condition and designed specifically
for the firearm; and (4) have what?
Safety - (answers)The TOP PRIORITY of all participants in firearms training is
what?
Loaded - (answers)All firearms should be treated as if they are what?
Revolver - (answers)The proper method of unloading what type of firearm
involves opening the cylinder; ejecting cartridges into your hand; physically and
visually checking the chambers to insure that each is empty; and counting the
rounds in your hand to insure that they are all accounted for?
You check it yourself and confirmed it is unloaded - (answers)You can presume a
firearm is unloaded if what?
, 2|Page
After you have taken position on the firing line and the command to load has
been given by the tower operator. - (answers)When will you first load your
firearm while on the range?
The muzzle has cleared the holster, the muzzle is pointing down range, and the
target has been identified - (answers)Never place your finger on the trigger until
when?
Outside the trigger guard - (answers)Once in the ready gun position, the shooter's
trigger finger should be located where?
Perform the proper malfunction clearance procedure and continue firing -
(answers)In the event of a malfunction in a semi-automatic pistol, you should do
what?
The barrel has been checked for obstructions by a line officer - (answers)Never
fire a succeeding round following a SQUID load until when?
Misfire - (answers)What is the failure of a PRIMER to ignite the powder charge?
Hangfire - (answers)What is the TEMPORARY failure of a primer to ignite the
POWDER charge?
