CWEA Collections Grade 2 Practice Test
Latest Update Questions and Answers
1. Why are gasoline and volatile solvents objectionable when present in a
sewer?
Answer> They produce an explosion hazard
2. You should never attempt to install, troubleshoot, maintain, repair, or replace
electrical equipment unless
Answer> You know what you are doing, are qualified, and are authorized.
3. How many different areas of traffic zones are there when working in road-
ways?
1/
18
,Answer> Five
4. Why should hydrogen sulfide be controlled?
Answer> To protect sewers and structures from corrosion
5. Personnel entering a Permit Required Confined Space must have the follow- ing
training
Answer> Entry and rescue procedures
6. To find proper protective gear before application of a product, you wou
Answer> Look at the MSDS (Material Safety Data Sheet)
7. The gas most commonly associated with septic wastewater is
Answer> Hydrogen Sulfide (H2S)
8. The lack of an unpleasant odor in a structure does not always mean that
dangerous gases are not present because
Answer> Some dangerous gases have no odor
9. What four conditions are necessary to create an explosion?
Answer> Combustible gas, adequate oxygen, sufficient heat, and proper mixing of
gas and oxygen.
2/
18
, 10. What does "transition area" mean in traffic control?
Answer> Moves traffic out of its normal path
11. The term "transition area" is one component of a
Answer> Traffic Control Zone
12. What elements should be considered to improve worker safety in High
Speed Temporary Traffic Control Zones?
Answer> Rerouting traffic around the work site, positioning of law enforcement
officers in the temporary traffic control zone, and work zone training.
13. What key factors would you need to address when developing an S.O.P. for
Lift Station failure?
Answer> Traffic control plan, by-pass connections, and spill con- tainment.
14. "Spring Blades" are a type of tool used with
Answer> Power Rodder
15. Porcupine, Root Saw, and a Square Bar Cork Screw are all tools used for
Answer> Sewer rodding
16. What tool would you use to cut VCP pipe?
Answer> Chain pipe cutter
3/
18
Latest Update Questions and Answers
1. Why are gasoline and volatile solvents objectionable when present in a
sewer?
Answer> They produce an explosion hazard
2. You should never attempt to install, troubleshoot, maintain, repair, or replace
electrical equipment unless
Answer> You know what you are doing, are qualified, and are authorized.
3. How many different areas of traffic zones are there when working in road-
ways?
1/
18
,Answer> Five
4. Why should hydrogen sulfide be controlled?
Answer> To protect sewers and structures from corrosion
5. Personnel entering a Permit Required Confined Space must have the follow- ing
training
Answer> Entry and rescue procedures
6. To find proper protective gear before application of a product, you wou
Answer> Look at the MSDS (Material Safety Data Sheet)
7. The gas most commonly associated with septic wastewater is
Answer> Hydrogen Sulfide (H2S)
8. The lack of an unpleasant odor in a structure does not always mean that
dangerous gases are not present because
Answer> Some dangerous gases have no odor
9. What four conditions are necessary to create an explosion?
Answer> Combustible gas, adequate oxygen, sufficient heat, and proper mixing of
gas and oxygen.
2/
18
, 10. What does "transition area" mean in traffic control?
Answer> Moves traffic out of its normal path
11. The term "transition area" is one component of a
Answer> Traffic Control Zone
12. What elements should be considered to improve worker safety in High
Speed Temporary Traffic Control Zones?
Answer> Rerouting traffic around the work site, positioning of law enforcement
officers in the temporary traffic control zone, and work zone training.
13. What key factors would you need to address when developing an S.O.P. for
Lift Station failure?
Answer> Traffic control plan, by-pass connections, and spill con- tainment.
14. "Spring Blades" are a type of tool used with
Answer> Power Rodder
15. Porcupine, Root Saw, and a Square Bar Cork Screw are all tools used for
Answer> Sewer rodding
16. What tool would you use to cut VCP pipe?
Answer> Chain pipe cutter
3/
18
