DHL INTERVIEW ATPL || UPDATED
VERIFIED QUESTIONS WITH
CORRECT ANSWERS FROM
ACTUAL PAST EXAMS
What is the VOR change over distance? - CORRECT-ANSWER-60NM
What is the minimum distance between parallel runways? - CORRECT-
ANSWER-915m
what the key points of using Mode 2 for parallel runways? - CORRECT-
ANSWER-Only straight in approaches allowed
interception angle of no more that 30 degrees
must be straight and level 1NM for localiser
must be straight and level 2NM for Glideslope
Minimum separation of 3NM on same Loc
,Min separation of 2 NM on adjacent Loc
Missed approach tracks diverge by at least 30 degree
what is the minimum time a flight plan must be filed before departure -
CORRECT-ANSWER-60 minutes
how does a pilot create a slip or a skid and how it is indicated on the
turn co-ordinator? - CORRECT-ANSWER-Slip - opposite rudder to
direction of turn = ball will be at the same side of the turn
Skid - too much rudder in the direction of the turn = ball will be on the
opposite side to the turn
what time must ATC clocks be within? - CORRECT-ANSWER-30 seconds
what are the Airspace separations rules for Class A - CORRECT-
ANSWER-IFR Only
,What are the Airspace separation rules for Class B - CORRECT-ANSWER-
IFR and VFR seperated
What are the Airspace separation rules for Class C - CORRECT-ANSWER-
IFR separated from IFR
IFR Separated from VFR
VFR Info about VFR
Speed limited below FL100 250kts
IFR ( speed limit only on ATC instruction)
What are the Airspace separation rules for Class D - CORRECT-ANSWER-
IFR Separated from VFR
IFR Info about VFR
VFR Info about VFR
Speed limit below FL100 250kts
, what its the difference between class D and Class E airspace for VFR -
CORRECT-ANSWER-No ATC required
No SVFR
What is Load Shedding - CORRECT-ANSWER-Reducing electrical load on
the system by turning of unnecessary electrical components
how would an artificial feel unit be connected? - CORRECT-ANSWER-In
Parallel
otherwise if it failed it would stop the system
what are booster pumps - CORRECT-ANSWER-low pressure centrifugal
boots that supply fuel to the engines.
why are booster pumps important? - CORRECT-ANSWER-they prevent
cavitation of the engine driven pumps at high altitude.
VERIFIED QUESTIONS WITH
CORRECT ANSWERS FROM
ACTUAL PAST EXAMS
What is the VOR change over distance? - CORRECT-ANSWER-60NM
What is the minimum distance between parallel runways? - CORRECT-
ANSWER-915m
what the key points of using Mode 2 for parallel runways? - CORRECT-
ANSWER-Only straight in approaches allowed
interception angle of no more that 30 degrees
must be straight and level 1NM for localiser
must be straight and level 2NM for Glideslope
Minimum separation of 3NM on same Loc
,Min separation of 2 NM on adjacent Loc
Missed approach tracks diverge by at least 30 degree
what is the minimum time a flight plan must be filed before departure -
CORRECT-ANSWER-60 minutes
how does a pilot create a slip or a skid and how it is indicated on the
turn co-ordinator? - CORRECT-ANSWER-Slip - opposite rudder to
direction of turn = ball will be at the same side of the turn
Skid - too much rudder in the direction of the turn = ball will be on the
opposite side to the turn
what time must ATC clocks be within? - CORRECT-ANSWER-30 seconds
what are the Airspace separations rules for Class A - CORRECT-
ANSWER-IFR Only
,What are the Airspace separation rules for Class B - CORRECT-ANSWER-
IFR and VFR seperated
What are the Airspace separation rules for Class C - CORRECT-ANSWER-
IFR separated from IFR
IFR Separated from VFR
VFR Info about VFR
Speed limited below FL100 250kts
IFR ( speed limit only on ATC instruction)
What are the Airspace separation rules for Class D - CORRECT-ANSWER-
IFR Separated from VFR
IFR Info about VFR
VFR Info about VFR
Speed limit below FL100 250kts
, what its the difference between class D and Class E airspace for VFR -
CORRECT-ANSWER-No ATC required
No SVFR
What is Load Shedding - CORRECT-ANSWER-Reducing electrical load on
the system by turning of unnecessary electrical components
how would an artificial feel unit be connected? - CORRECT-ANSWER-In
Parallel
otherwise if it failed it would stop the system
what are booster pumps - CORRECT-ANSWER-low pressure centrifugal
boots that supply fuel to the engines.
why are booster pumps important? - CORRECT-ANSWER-they prevent
cavitation of the engine driven pumps at high altitude.
