BICSI INSTALLER 2: FIBER MODULE 2025
update| comprehensive questions and verified
answers (complete solutions) GUARANTEED
SUCCESS|GRADE A+!! (100% ACCURATE) GET IT
RIGHT!!
Save
Terms in this set (109)
Addresses the safety of persons, property and the
Code environment associated with the ITS cabling
Installation
NEC National electric code
One thousand hertz = 1KHz
Frequency conversion
One million Kilohertz = 1 MHz
chart
One billion Megahertz = 1 GHz
NFPA National Fire protection association
AHJ Authorities having jurisdiction
- Telecommunications Industry association
TIA/EIA
- Electronic industries alliance
- Building
- Industry
BICSI - Consulting
- Service
- International
https://quizlet.com/1032073115/bicsi-installer-2-fiber-module-2025-update-comprehensive-questions-and-verified-answers-complete-solutions-gu… 1/9
, 4/16/25, 5:09 AM BICSI INSTALLER 2: FIBER MODULE 2025 update| comprehensive questions and verified answers (complete solutions) GUA…
Optical pulses using cycles per second, 1 unit of
Frequency hertz = 1 cycle per second
4hz = 4 cycles per second
The movement of information in the form of
Definition of transmission electrical or optical signals from one point to
another through a transport medium
Bending of the light as it passes from one medium
Refraction
into another
- Quantifies the bandwidth of a cabling system in a
MHz frequency range
- Information handling capabilities of the medium
- transmission rate
- Number of bits information that can be
Megabits
transported over the medium(vehicles of the
highway)
- Core
Anatomy of a fiber - Cladding
- Coating
The decrease in magnitude of transmission signal
Attenuation = strength between points, expressed in decibel as
the ratio of out put to input signal
Attenuation [insertion Light pulses traveling along fiber are subjected to
loss] = loss due to absorption or scattering of the light
Controlled by the manufacture/expresses in
Intrinsic = decibels per-kilometer impacts the signal to reach
the receiver with sufficient power
Controlled by the installer/expresses in decibels
Extrinsic = per-kilometer impacts the signal to reach the
receiver with sufficient power
- Expressed in decibels per kilometers
Attenuation loss = - Impacts the ability of the signal to reach the
receiver with sufficient power
dBm = Optical power referred to as 1 milliwatt of power
CWDM = Coarse wave division multiplexing
https://quizlet.com/1032073115/bicsi-installer-2-fiber-module-2025-update-comprehensive-questions-and-verified-answers-complete-solutions-gu… 2/9