BASIC ELECTRICAL ENGINEERING EXAM QUESTIONS AND ANSWERS 100% CORRECT AND UPDATED!!!

I=Q/T or Q=IT - ANSWER where Q is the symbol of charge measured in Coulombs(c) I is the current in amperes (A) and t is the time in seconds(s). The current can also be defined as the rate of charge passing through a point in an electric circuit i e i = dq/dt circuit loads: A load generally refers to a component or a piece of equipment connected to the output of an electric circuit - ANSWER circuit elements 1. resistor (R) 2. inductor(I) 3. Capacitor (C) voltage and current - ANSWER voltage attempts to make a current flow, and current will flow the circuit is complete. Voltage is sometimes describe as the "push" or "force" of the electricity, it isn't really a force but this may help to imagine what is happening. It is possible to have voltage without current, but current cannot flow without voltage. Charge - ANSWER electric charge, basic property of matter carried by some elementary particles. Electric charge, which can be positive or negative occurs in discrete natural units and is neither created nor destroyed electric circuits - ANSWER which are collections of circuit elements connected together, are the most fundamental structures of electrical engineering. A circuit is an interconnection of simple electrical devices that have at least one closed path in which current may flow. charge and electric force - ANSWER the proton has a charge of 1.602 10-19 coulombs (c) while the electron has a charge of -1.602 x 10-19 c. the neutron has zero charge. charge and electric force continue - ANSWER electric charge, and more so, its movement are the most basic items of interest in electrical engineering. When many charged particles are collected together, larger charges and charge distributors occur. There may be point charge (c), line charges (c/m) s