CENSECFOR M16A3/M4A1 SERVICE RIFLE
OPERATOR TRAINING COURSE PRETEST
Safety on, magazine removed, chamber empty, bolt forward, ejection port cover closed.
Which Weapon Condition Code is this? - Answers :Condition 4
What caliber is the M16A3 service rifle? - Answers :5.56 mm
Which of the following is NOT a selector lever setting for the M16A3/M4A1 service rifle?
- Answers :Manual
Which of the following is NOT an M16A3/M4A1 service rifle Weapon Condition Code? -
Answers :Safety off, magazine inserted, round in chamber, bolt forward, ejection port
cover closed.
What is the maximum effective range of the M16A3 service rifle? - Answers :1,804 ft.
(550 m)
A safety/function check should be performed ________ . - Answers :anytime the rifle
has been reassembled
A danger message is an operating or maintenance procedure, practice, or condition
that, if not strictly observed ________ result in death or serious injury, or threatens the
primary mission of the ship. - Answers :will
What is the maximum range (in meters) of the M16A3 service rifle? - Answers :3,600
meters
The remedial action steps below would be used to fix which stoppage?
1. Press the magazine catch releasing the magazine, remove the empty magazine, and
stow it on person if time permits.
2. Insert a filled magazine into the magazine well and tug downward on the magazine to
ensure it is properly seated.
3. Pull the charging handle to the rear and then release it to allow the bolt to move
forward and chamber a round.
4. Sight in and attempt to fire. - Answers :Bolt is locked to the rear
What is the cyclic rate of fire in automatic mode for the M4A1 service rifle? - Answers
:90 rounds per minute
Which common stoppage is characterized by a double feed? - Answers :Brass is
obstructing the chamber area
What is the maximum effective range of the M4A1 service rifle? - Answers :1,640 ft.
(500 m)
OPERATOR TRAINING COURSE PRETEST
Safety on, magazine removed, chamber empty, bolt forward, ejection port cover closed.
Which Weapon Condition Code is this? - Answers :Condition 4
What caliber is the M16A3 service rifle? - Answers :5.56 mm
Which of the following is NOT a selector lever setting for the M16A3/M4A1 service rifle?
- Answers :Manual
Which of the following is NOT an M16A3/M4A1 service rifle Weapon Condition Code? -
Answers :Safety off, magazine inserted, round in chamber, bolt forward, ejection port
cover closed.
What is the maximum effective range of the M16A3 service rifle? - Answers :1,804 ft.
(550 m)
A safety/function check should be performed ________ . - Answers :anytime the rifle
has been reassembled
A danger message is an operating or maintenance procedure, practice, or condition
that, if not strictly observed ________ result in death or serious injury, or threatens the
primary mission of the ship. - Answers :will
What is the maximum range (in meters) of the M16A3 service rifle? - Answers :3,600
meters
The remedial action steps below would be used to fix which stoppage?
1. Press the magazine catch releasing the magazine, remove the empty magazine, and
stow it on person if time permits.
2. Insert a filled magazine into the magazine well and tug downward on the magazine to
ensure it is properly seated.
3. Pull the charging handle to the rear and then release it to allow the bolt to move
forward and chamber a round.
4. Sight in and attempt to fire. - Answers :Bolt is locked to the rear
What is the cyclic rate of fire in automatic mode for the M4A1 service rifle? - Answers
:90 rounds per minute
Which common stoppage is characterized by a double feed? - Answers :Brass is
obstructing the chamber area
What is the maximum effective range of the M4A1 service rifle? - Answers :1,640 ft.
(500 m)
