NCCER CORE MODULE 1 / STUDY GUIDE
EXAM NEWEST ACTUAL QUESTIONS AND
ANSWERS (A+ GUIDE SOLUTION)
Companies with strong safety cultures usually have lower _ . - Answerturnover
Safety is a learned behavior and attitude. T/F - AnswerTRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _.
- Answerunsafe conditions
The activity that consists of breaking a job into its component task and then analyzing
each step for potential hazards is called _ _ _ . - Answerjob safety analysis
The measure of probability, consequences, and exposure related to an event is referred
to as _ . - AnswerRisk
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _ _ _ _ _ _ _ . - Answercover the opening and label the cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . -
Answerin the middle of the back
A personal fall arrest system should be inspected monthly by a _ _ . -
Answercompetent person
Lanyards that have no shock-absorbing features are used for _ . -
Answerpositioning
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _ _ _ . -
Answer3 feet (91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as
protective measures to prevent objects from falling and striking a person below. -
AnswerToeboards, debris nets, canopies
When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _
_ _. - Answer4:1 height-to-base ratio
EXAM NEWEST ACTUAL QUESTIONS AND
ANSWERS (A+ GUIDE SOLUTION)
Companies with strong safety cultures usually have lower _ . - Answerturnover
Safety is a learned behavior and attitude. T/F - AnswerTRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _.
- Answerunsafe conditions
The activity that consists of breaking a job into its component task and then analyzing
each step for potential hazards is called _ _ _ . - Answerjob safety analysis
The measure of probability, consequences, and exposure related to an event is referred
to as _ . - AnswerRisk
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _ _ _ _ _ _ _ . - Answercover the opening and label the cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . -
Answerin the middle of the back
A personal fall arrest system should be inspected monthly by a _ _ . -
Answercompetent person
Lanyards that have no shock-absorbing features are used for _ . -
Answerpositioning
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _ _ _ . -
Answer3 feet (91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as
protective measures to prevent objects from falling and striking a person below. -
AnswerToeboards, debris nets, canopies
When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _
_ _. - Answer4:1 height-to-base ratio
