BMW ASSOCIATE LEVEL ASE TEST (ACTUAL 2025/2026)
QUESTIONS WITH 100% VERIFIED ANSWERS!!
BMW special took 83 30 0 492 467 can be used during an
inspection to measure:
Coolant level
Coolant concentrate
Brake pad thickness and tire thread depth
Air pressure
Brake pad thickness and tire thread depth
Tech A states that during a Quality Certification 1 on a G05 X5 it
is necessary to press the 'AUTO' button in the light switch
cluster.
Tech B states that during a Quality Certification 1 on a G05 X5
you can use the same QC1 inspection sheet as a G02.
Both A and B
If the vehicle is placed in transport mode and the vehicle
battery voltage drops below 12 volts (approximately 30% State
of Charge), the "Replace Battery" message will be displayed in
the instrument cluster.
,Tech A says that charging the battery back to 100% State of
Charge and clearing faults will remove the message from the
instrument cluster.
Tech B says that running Energy Diagnosis and clearing faults
will remove the message from the instrument cluster.
Neither A nor B
Transport Mode Switching Device can be used to successfully
perform a QC1 inspection.
True or False?
False
Tech A states that on 2019 Quality Certification 1 the DOT
(Department of Transportation) numbers from each tire's
sidewall do not need to be recorded for factory-fitted tires. The
DOT numbers were recorded at the manufacturing plant and
stored in a proprietary database.
Tech B states that if a BMW-approved accessory wheel set is
installed by the BMW center prior to customer delivery, the
DOT numbers from the accessory tires must be recorded on
an individually printed QC1 checklist.
Both A and B
, Vehicle history on a specific vehicle can be retrived from
DCSnet.
Technician A says that the whole VIN number is required to
access the information.
Technician B says that only the last 7 of the VIN are required to
access the information.
Who is correct?
B Only
According to MSDS warning symbols, the warning symbol with
a skull and cross bones shown represents
Acute toxicity
All of the following are true concerning the Roundtable,
EXCEPT :
There are 12 shows each year.
Each Roundtable has a bulletin describing the topics.
The Roundtable is accessed through AIR.
Each Roundtable has a quiz
QUESTIONS WITH 100% VERIFIED ANSWERS!!
BMW special took 83 30 0 492 467 can be used during an
inspection to measure:
Coolant level
Coolant concentrate
Brake pad thickness and tire thread depth
Air pressure
Brake pad thickness and tire thread depth
Tech A states that during a Quality Certification 1 on a G05 X5 it
is necessary to press the 'AUTO' button in the light switch
cluster.
Tech B states that during a Quality Certification 1 on a G05 X5
you can use the same QC1 inspection sheet as a G02.
Both A and B
If the vehicle is placed in transport mode and the vehicle
battery voltage drops below 12 volts (approximately 30% State
of Charge), the "Replace Battery" message will be displayed in
the instrument cluster.
,Tech A says that charging the battery back to 100% State of
Charge and clearing faults will remove the message from the
instrument cluster.
Tech B says that running Energy Diagnosis and clearing faults
will remove the message from the instrument cluster.
Neither A nor B
Transport Mode Switching Device can be used to successfully
perform a QC1 inspection.
True or False?
False
Tech A states that on 2019 Quality Certification 1 the DOT
(Department of Transportation) numbers from each tire's
sidewall do not need to be recorded for factory-fitted tires. The
DOT numbers were recorded at the manufacturing plant and
stored in a proprietary database.
Tech B states that if a BMW-approved accessory wheel set is
installed by the BMW center prior to customer delivery, the
DOT numbers from the accessory tires must be recorded on
an individually printed QC1 checklist.
Both A and B
, Vehicle history on a specific vehicle can be retrived from
DCSnet.
Technician A says that the whole VIN number is required to
access the information.
Technician B says that only the last 7 of the VIN are required to
access the information.
Who is correct?
B Only
According to MSDS warning symbols, the warning symbol with
a skull and cross bones shown represents
Acute toxicity
All of the following are true concerning the Roundtable,
EXCEPT :
There are 12 shows each year.
Each Roundtable has a bulletin describing the topics.
The Roundtable is accessed through AIR.
Each Roundtable has a quiz
