Phase 4)CLEET Phase 4: Questions & Answers;Latest Updated A+ Guide

How do you transfer a REVOLVER? (Ans- Open the cylinder, unload the firearm, and present the firearm grip first (with the muzzle down). With a REVOLVER! (Ans- (1) When the cylinder is opened, all rounds are emptied into the shooter's hand and counted; (2) Once the rounds are accounted for, grasp the firearm by the top strap and present the firearm grip first (muzzle pointing to the ground). How do you transfer a SEMI-AUTO PISTOL? (Ans- Remove the magazine, unload the chamber, lock the slide open, and present the firearm grip first (muzzle down). With a SEMI-AUTO PISTOL! (Ans- (1) With the safety on ( and de-cocked if applicable), remove the magazine and unload the chamber by pushing the slide to the rear. Allow the chambered round to exit through the magazine well; (2) Lock the slide back and visually check the chamber; (3) After you have confirmed an empty chamber, present the firearm grip first (muzzle pointing to the ground). If you drop a round, magazine, or speed loader while reloading, what should you do? (Ans- DO NOT try to pick it up. With the muzzle pointing down range, raise your off-gun hand. A line officer will retrieve the dropped items. The safe handling and storage of your firearms is one of your what? (Ans- One of your Primary Responsibilities. What clearly defines a personal liability for misuse of or misconduct with a firearm? (Ans- The law- Municipal, county, state, and federal ordinances or statues Your conscience and any personal code of this make you responsible for handling and storing a firearm safety. (Ans- Moral responsibility You should store the firearm and it's ammunition separately in separate, locked boxes that are secure. True or False? (Ans- True The enclosure over the underside of the frame that protects the trigger is called what? (Ans- Trigger Guard (Revolver) The part that fits into the frame and is chambered for a specific caliber of ammunition is called what? (Ans- Cylinder (Revolver) A common cause of malfunctions in a semi-automatic pistol is a dirty or damaged magazine. True or False. (Ans- True Houses the barrel, slide return spring, and chamber is called a what? (Ans- Slide The action of the slide initiates the unloading and reloading sequence. True or False. (Ans- True The lever, normally found on the left side slide, that disengages the firing mechanism when activated and prevents the pistol from being fired is called what? (Ans- Safety / De-cocking Lever The enclosure over the underside of the frame that protects the trigger is called what? (Ans- Trigger guard (Semi-automatic) What are the 6 fundamentals of handgun shooting? (Ans- (1) Stance (body position); (2) Grip; (3) Sight alignment (4) Breath control; (5) Trigger control; (6) Follow through You should always maintain the grip while squeezing / pressing the trigger. True or False (Ans- True Taking a breath and letting it out to the natural respiratory pause, then hold your breath during the shot is called what? (Ans- Breath Control Applying continuous pressure to the trigger as you fire is called what? (Ans- Trigger Control. Develop a slow, even rhythm. Complete the fundamentals listed above the same way each time you fire. Follow through means performing the fundamentals without alteration until the bullet leaves the barrel is called what? (Ans- Follow Through During a pause in a tactical situation (using cover, if available) is called what? (Ans- Tactical Load Depress the magazine release and catch the magazine how? (Ans- Between the fingers of your WEAK hand