Page |1
CSWA solidworks certification exam
Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded
A+
True or False - Dragging the edge of plane changes its geometric size.
Ans: False
These following methods can be used to begin a sketch on a plane.
Ans: Selecting a plane in the graphics area and then clicking on the Sketch button in the
CommandManager, clicking on the Sketch button in the CommandManager and then selecting
a plane, right-clicking on a plane and selecting "Sketch" from the context toolbar
This axis of the reference triad should be clicked to change the view normal to the Top plane
Ans: Y-axis
True or False - In order to sketch on a face of a body, the face must be parallel with one of
the three default planes in SOLIDWORKS.
Ans: False
True or False - A face must be planar in order to have a sketch drawn on it.
Ans: True
The Smart Dimension tool determines what type of dimension to add by
Ans: The geometry you select
You access the "Smart Dimension" tool by
, Page |2
Ans: Launching the Shortcut Toolbar by pressing "S" on the keyboard and click "Smart
Dimension", using mouse-gestures by right-clicking and dragging up in the graphics area,
clicking the "Smart Dimension" icon from the Sketch tab of the CommandManager
The Smart Dimension tool automatically adds what type of dimension when you select an
arc?
Ans: Radial
How can you edit the value of a dimension by using the Modify Dialog box?
Ans: Using the spinbox to increase or decrease the value, using the arrows to increase or
decrease the value, clicking in the window and type in a new value
True or False - When dimensioning to centerlines, SOLIDWORKS provides the ability to
change from linear to diameter dimensions.
Ans: True
Which is not an available option for a line?
Ans: snap to axes
Which line type allows dimensions to be added with the creation of the line?
Ans: Angle
What method will not convert a line to a construction line?
Ans: Selecting a line, clicking "Centerline" button in the CommandManager
True or False - When a corner rectangle is sketched, two of the sides are automatically set to
horizontal and the other two are automatically set to vertical.
Ans: True
What type of rectangle tool adds centerlines when the sketch entity is drawn?
CSWA solidworks certification exam
Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded
A+
True or False - Dragging the edge of plane changes its geometric size.
Ans: False
These following methods can be used to begin a sketch on a plane.
Ans: Selecting a plane in the graphics area and then clicking on the Sketch button in the
CommandManager, clicking on the Sketch button in the CommandManager and then selecting
a plane, right-clicking on a plane and selecting "Sketch" from the context toolbar
This axis of the reference triad should be clicked to change the view normal to the Top plane
Ans: Y-axis
True or False - In order to sketch on a face of a body, the face must be parallel with one of
the three default planes in SOLIDWORKS.
Ans: False
True or False - A face must be planar in order to have a sketch drawn on it.
Ans: True
The Smart Dimension tool determines what type of dimension to add by
Ans: The geometry you select
You access the "Smart Dimension" tool by
, Page |2
Ans: Launching the Shortcut Toolbar by pressing "S" on the keyboard and click "Smart
Dimension", using mouse-gestures by right-clicking and dragging up in the graphics area,
clicking the "Smart Dimension" icon from the Sketch tab of the CommandManager
The Smart Dimension tool automatically adds what type of dimension when you select an
arc?
Ans: Radial
How can you edit the value of a dimension by using the Modify Dialog box?
Ans: Using the spinbox to increase or decrease the value, using the arrows to increase or
decrease the value, clicking in the window and type in a new value
True or False - When dimensioning to centerlines, SOLIDWORKS provides the ability to
change from linear to diameter dimensions.
Ans: True
Which is not an available option for a line?
Ans: snap to axes
Which line type allows dimensions to be added with the creation of the line?
Ans: Angle
What method will not convert a line to a construction line?
Ans: Selecting a line, clicking "Centerline" button in the CommandManager
True or False - When a corner rectangle is sketched, two of the sides are automatically set to
horizontal and the other two are automatically set to vertical.
Ans: True
What type of rectangle tool adds centerlines when the sketch entity is drawn?
