CCIL EXAM QUESTIONS| WITH ALREADY SOLVED CORRECTLY ANSWERS!! | ASSURED SUCCESS

CCIL EXAM QUESTIONS| WITH
ALREADY SOLVED CORRECTLY
ANSWERS!! | ASSURED SUCCESS



The sample shall be taken between ___ & __ points of the discharge -

🧠ANSWER ✔✔10% and 90%


For 100mm x 200mm cylinders are to be cast a minimum of ____ sample -

🧠ANSWER ✔✔20L


For 150mm x 300mm cylinders are to be cast a minimum of ____ sample -

🧠ANSWER ✔✔30L


For 150mm x 150mm x 535 cylinders are to be cast a minimum of ____

sample - 🧠ANSWER ✔✔55L


Concrete may be reused from the slump test for other test - 🧠ANSWER

✔✔True


The samples shall be obtained transported and mixed within ____ -

🧠ANSWER ✔✔10 minutes



COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
1
STATEMENT. ALL RIGHTS RESERVED

, The samples shall be protected from - 🧠ANSWER ✔✔Sun,Wind, other

sources of evaporation and contamination

Concrete contains aggregate larger than the size of the moulds, what is the

process the sample should go through - 🧠ANSWER ✔✔Wet sieving prior to

testing

For all density test, an unsieved sample shall be used - 🧠ANSWER

✔✔True


Do not use cardboard moulds for specified concrete strength greater than -

🧠ANSWER ✔✔35


For 100mm x 200mm cylinder, use a round steel rod ____ in diameter and

between ____ & ___mm in length - 🧠ANSWER ✔✔10mm +|- 1, 450mm

&650mm

For 150mm x 200mm cylinder, use a round steel rod ____ in diameter and

between ____ & mm in length - 🧠ANSWER ✔✔16 +|-1, 450mm not more

600mm

Moist room shall be maintained at a temp of _____ & the relative humidity

of not less than ____ - 🧠ANSWER ✔✔23 +/- 2, 95%




COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
2
STATEMENT. ALL RIGHTS RESERVED