Last RCO Final questions with verified
answers graded A+
1. If the tilt feature is 6. List the steps for re- covering a
allowed to time full service
out, what brake
application will
result?
2. If the secondary
op- erator places
the RCT into
emergency, which
RCO(s) must
recover the
emergency?
3. What are all
move- ments in
remote con- trol
operations
considered?
4. List the steps to
re- cover an
emergency brake
application
5. When the RCO
uses cameras to
protect a road
crossing what
speed must
move- ment
enter the crossing?
1/
34
,Last RCO Final questions with verified
answers graded A+
An emergency brake application
1. Move the speed selector to stop
Both RCO's must perform the
2. Toggle the automatic brake selector to full
recovery procedure
The Secondary RCO must
recover the emergency
application first
Shoving movements
1. Place speed selector to stop
2. Move the independent brake
override lever to emergency
3. Press the vigilance toggle
4. Place independent
brake override lever to
release 4 mph until the
crossing is occupied
2/
34
,Last RCO Final questions with verified
answers graded A+
brake application 12. If the primary RCT would fail,
how would the
7. What is the first
RCT feature the
operator tests
when
initially setting up a lo-
comotive for
remote operation?
8. What condition
would cause a
steady tone
alarm?
9. Which RCT
compo- nent will
send an
emergency stop
command to the
RCL?
10. How would a RCO
re- spond when a
beeping or
pulsing alarm sounds
on the RCT?
11. What is the
preferred method
of slowing or
stopping
your movement?
3/
34
, Last RCO Final questions with verified
answers graded A+
3. Press the vigilance toggle or or
4. Move the Using the coast feature
automatic brake
Re-link as a single RCO
selector to release The
tilt feature
ting the RCT by more than 45 degrees
e independent brake override lever
ess a vigilance toggle
amping
the
speed
select
4/
34
answers graded A+
1. If the tilt feature is 6. List the steps for re- covering a
allowed to time full service
out, what brake
application will
result?
2. If the secondary
op- erator places
the RCT into
emergency, which
RCO(s) must
recover the
emergency?
3. What are all
move- ments in
remote con- trol
operations
considered?
4. List the steps to
re- cover an
emergency brake
application
5. When the RCO
uses cameras to
protect a road
crossing what
speed must
move- ment
enter the crossing?
1/
34
,Last RCO Final questions with verified
answers graded A+
An emergency brake application
1. Move the speed selector to stop
Both RCO's must perform the
2. Toggle the automatic brake selector to full
recovery procedure
The Secondary RCO must
recover the emergency
application first
Shoving movements
1. Place speed selector to stop
2. Move the independent brake
override lever to emergency
3. Press the vigilance toggle
4. Place independent
brake override lever to
release 4 mph until the
crossing is occupied
2/
34
,Last RCO Final questions with verified
answers graded A+
brake application 12. If the primary RCT would fail,
how would the
7. What is the first
RCT feature the
operator tests
when
initially setting up a lo-
comotive for
remote operation?
8. What condition
would cause a
steady tone
alarm?
9. Which RCT
compo- nent will
send an
emergency stop
command to the
RCL?
10. How would a RCO
re- spond when a
beeping or
pulsing alarm sounds
on the RCT?
11. What is the
preferred method
of slowing or
stopping
your movement?
3/
34
, Last RCO Final questions with verified
answers graded A+
3. Press the vigilance toggle or or
4. Move the Using the coast feature
automatic brake
Re-link as a single RCO
selector to release The
tilt feature
ting the RCT by more than 45 degrees
e independent brake override lever
ess a vigilance toggle
amping
the
speed
select
4/
34
