RVTI - CHASSIS – STUDY GUIDE 1005
ACCURATE.
When inspecting the hydraulic fluid level in the reservoir, clean the top of the Reservoir
before removing the cap to - ANSWERPrevent foreign material from entering the
hydraulic system
Tongue weight (TW) involves _____ force. - ANSWERdownward
Gross axle weight (GAW) is the actual weight of a fully loaded vehicle carried by
______ axle(s). - ANSWER1
When interpreting the year of production, an RV tire has a typical life of - ANSWER5-7
years
When verifying the installation of pin box couplers on a fifth wheel hitch, the hitch should
be ______ the frame. - ANSWERSquare with
When testing electric brakes, a technician pulls the breakaway cable while spinning the
wheel. If the breakaway is properly functioning, - ANSWERThe wheel should stop
spinning
Consult the vehicle manufacturer, tire dealer, or tire manufacturer when considering
changing to a tire other than those shown in the - ANSWERFederal certification label
If a vehicle does not have a certification label listed on it, find tire and loading
information - ANSWERIn the owner's manual
A technician is weighing a vehicle with no cargo as built at the factory. The vehicle
includes full fuel, engine oil, and coolants and no freshwater, propane, occupants, or
dealer-installed accessories. Which type of weight is the technician measuring? -
ANSWERUnloaded Vehicle Weight (UVW)
CCC was formerly called - ANSWERNet Carrying Capacity (NCC)
CCC stands for _____ Carrying Capacity. - ANSWERCargo
GCWR - GVWR (trailer) = - ANSWERMaximum allowable weight for the tow vehicle
GCWR is most closely associated with - ANSWERtotal loaded weight
CCC is equal to weight minus a couple factors. What is one of those factors? -
ANSWERUVW
For chassis leveling systems, hydraulic fluid should always be checked when levelers
and/or rooms are - ANSWERRetracted
ACCURATE.
When inspecting the hydraulic fluid level in the reservoir, clean the top of the Reservoir
before removing the cap to - ANSWERPrevent foreign material from entering the
hydraulic system
Tongue weight (TW) involves _____ force. - ANSWERdownward
Gross axle weight (GAW) is the actual weight of a fully loaded vehicle carried by
______ axle(s). - ANSWER1
When interpreting the year of production, an RV tire has a typical life of - ANSWER5-7
years
When verifying the installation of pin box couplers on a fifth wheel hitch, the hitch should
be ______ the frame. - ANSWERSquare with
When testing electric brakes, a technician pulls the breakaway cable while spinning the
wheel. If the breakaway is properly functioning, - ANSWERThe wheel should stop
spinning
Consult the vehicle manufacturer, tire dealer, or tire manufacturer when considering
changing to a tire other than those shown in the - ANSWERFederal certification label
If a vehicle does not have a certification label listed on it, find tire and loading
information - ANSWERIn the owner's manual
A technician is weighing a vehicle with no cargo as built at the factory. The vehicle
includes full fuel, engine oil, and coolants and no freshwater, propane, occupants, or
dealer-installed accessories. Which type of weight is the technician measuring? -
ANSWERUnloaded Vehicle Weight (UVW)
CCC was formerly called - ANSWERNet Carrying Capacity (NCC)
CCC stands for _____ Carrying Capacity. - ANSWERCargo
GCWR - GVWR (trailer) = - ANSWERMaximum allowable weight for the tow vehicle
GCWR is most closely associated with - ANSWERtotal loaded weight
CCC is equal to weight minus a couple factors. What is one of those factors? -
ANSWERUVW
For chassis leveling systems, hydraulic fluid should always be checked when levelers
and/or rooms are - ANSWERRetracted
