©THEBRIGHT 2025 ALL RIGHTS RESERVED 11:11AM.
CSA Standard W47.1-09 - CWB Welding
Supervisor study guide WXE1.1. Exam
Questions And Answers 2025 Update.
Does the CSA Standard W47.1 specify the requirements for a company seeking certification? -
Answer✔Yes, This standard provides the requirements for the certification of companies
engaged in the fusion welding of steel and the qualification of their personnel and welding
procedures (Cl 1.1)
Who is responsible for the welded products a company produces? - Answer✔The company
(1.2) The requirements of this standard are based on the principle that a certified company has
full responsibility for the quality of the welded product it produces and this responsibility
cannot be transferred to its employed or retained personnel or to the administrator of this
standard.
Does this standard approve the products and services of a certified company? - Answer✔(Cl.
1.3) This standard governs the certification of companies. Certification pertains to the capability
of the company with respect to welding. Certification should not be construed as approving any
products or services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - Answer✔(Cl. 1.4) This standard
stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA Standard W47.1? -
Answer✔(Cl. 2.1, 2.2) This standard refers to the following publications, and where such
reference is made, it shall be to the edition listed below, including all amendments published
there to:
1
, ©THEBRIGHT 2025 ALL RIGHTS RESERVED 11:11AM.
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality steel/
Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal
Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for Arc
Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc
Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc
Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc
Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
2
CSA Standard W47.1-09 - CWB Welding
Supervisor study guide WXE1.1. Exam
Questions And Answers 2025 Update.
Does the CSA Standard W47.1 specify the requirements for a company seeking certification? -
Answer✔Yes, This standard provides the requirements for the certification of companies
engaged in the fusion welding of steel and the qualification of their personnel and welding
procedures (Cl 1.1)
Who is responsible for the welded products a company produces? - Answer✔The company
(1.2) The requirements of this standard are based on the principle that a certified company has
full responsibility for the quality of the welded product it produces and this responsibility
cannot be transferred to its employed or retained personnel or to the administrator of this
standard.
Does this standard approve the products and services of a certified company? - Answer✔(Cl.
1.3) This standard governs the certification of companies. Certification pertains to the capability
of the company with respect to welding. Certification should not be construed as approving any
products or services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - Answer✔(Cl. 1.4) This standard
stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA Standard W47.1? -
Answer✔(Cl. 2.1, 2.2) This standard refers to the following publications, and where such
reference is made, it shall be to the edition listed below, including all amendments published
there to:
1
, ©THEBRIGHT 2025 ALL RIGHTS RESERVED 11:11AM.
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality steel/
Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal
Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for Arc
Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc
Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc
Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc
Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
2
