MA Hoisting License Test
Terms in this set (81)
What is the most important THE OPERATOR
single factor to the safe
operation of the forklifts?
a) uses a forklift with a known defect
Many accidents happen b) travels an unsafe route
because the operator does c) carries unsafe loads
which of the following? d) uses unsafe operating techniques
When is it safe to operate NEVER
the forklift from a place
other than the operator's
seat?
Workers and bystanders THE OPERATOR
within the danger area of
the forklift should be
considered the
responsibility of?
a) smooth starts
Which of the following are
b) smooth stops
essential for safe
c) smooth turns
operation?
The operator "feathers" the MOVE THE LOAD SLOWLY
controls when he wants
to?
If you find a fault or TELL YOUR SUPERVISOR
suspect an unsafe
condition while inspecting or
operating a forklift you
should?
If bystanders or a fellow SOUND YOUR HORN OR ASK THEM TO MOVE
worker are in danger from a
raised load, you should?
a) Leverage
Which of the following
b) Center
of gravity
affect forklift safety?
c) Momentum
The pivot point of a forklift is? THE FRONT AXLE
, The teeter totter is a simple LEVERAGE
example of?
Safe load limits for a SHOULD NEVER BE EXCEEDED
particular forklift ...
When a forklift picks up a THE CENTER OF GRAVITY OF THE FORKLIFT MOVES
load on the forks... FORWARD
Forward tipping will occur On The Opposite Side Of The Front Axle
unless the forklift's center
of gravity is?
a) Starting
Momentum is a force created b) Stopping
by? c) Turning
Which of the following has a) Weight distribution
or have an Effect on the b) Axle length
amount of stability a forklift c) Wheel base
has?
a) Tipping
As the load of a forklift is
b) Loss of steering
raised, which of the
c) The effects of momentum
following dangers
increase?
What force can cause a MOMENTUM
loaded forklift to tip
forward when brakes are
applied?
When the forklift's center of THE FORKLIFT WILL TIP OVER
gravity goes beyond the
stability area?
True or False...Because FALSE
the forklifts are designed
with the forks in front it is
not possible for it to tip
backwards.
The type of forklift which is MAST FORKLIFT
designed
primarily to lift a load straight
up with a
limited amount of tilt
movement forward is the?
Terms in this set (81)
What is the most important THE OPERATOR
single factor to the safe
operation of the forklifts?
a) uses a forklift with a known defect
Many accidents happen b) travels an unsafe route
because the operator does c) carries unsafe loads
which of the following? d) uses unsafe operating techniques
When is it safe to operate NEVER
the forklift from a place
other than the operator's
seat?
Workers and bystanders THE OPERATOR
within the danger area of
the forklift should be
considered the
responsibility of?
a) smooth starts
Which of the following are
b) smooth stops
essential for safe
c) smooth turns
operation?
The operator "feathers" the MOVE THE LOAD SLOWLY
controls when he wants
to?
If you find a fault or TELL YOUR SUPERVISOR
suspect an unsafe
condition while inspecting or
operating a forklift you
should?
If bystanders or a fellow SOUND YOUR HORN OR ASK THEM TO MOVE
worker are in danger from a
raised load, you should?
a) Leverage
Which of the following
b) Center
of gravity
affect forklift safety?
c) Momentum
The pivot point of a forklift is? THE FRONT AXLE
, The teeter totter is a simple LEVERAGE
example of?
Safe load limits for a SHOULD NEVER BE EXCEEDED
particular forklift ...
When a forklift picks up a THE CENTER OF GRAVITY OF THE FORKLIFT MOVES
load on the forks... FORWARD
Forward tipping will occur On The Opposite Side Of The Front Axle
unless the forklift's center
of gravity is?
a) Starting
Momentum is a force created b) Stopping
by? c) Turning
Which of the following has a) Weight distribution
or have an Effect on the b) Axle length
amount of stability a forklift c) Wheel base
has?
a) Tipping
As the load of a forklift is
b) Loss of steering
raised, which of the
c) The effects of momentum
following dangers
increase?
What force can cause a MOMENTUM
loaded forklift to tip
forward when brakes are
applied?
When the forklift's center of THE FORKLIFT WILL TIP OVER
gravity goes beyond the
stability area?
True or False...Because FALSE
the forklifts are designed
with the forks in front it is
not possible for it to tip
backwards.
The type of forklift which is MAST FORKLIFT
designed
primarily to lift a load straight
up with a
limited amount of tilt
movement forward is the?
