, Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - CORRECT ANSWERS-False
Which of the following is not a correct general precaution that should be followed by all
power tool users? - CORRECT ANSWERS-Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - CORRECT
ANSWERS-True
What is the main danger associated with pneumatic tools? - CORRECT ANSWERS-
Getting hit by tool's attachment or fastener
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - CORRECT ANSWERS-True
What requirements are necessary to protect an electric tool user from shock? -
CORRECT ANSWERS-Both A and B
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
be equipped with guards above and below the base plate or shoe - CORRECT
ANSWERS-False
An important safety precaution to remember when operating powder-actuated tool is: -
CORRECT ANSWERS-Inspect it before use and determine that it is clean and that all
moving parts operate freely
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - CORRECT ANSWERS-False
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - CORRECT ANSWERS-Employers
What does MSD stand for? - CORRECT ANSWERS-musculoskeletal disorders
You should change your working position frequently by: - CORRECT ANSWERS-All of
the above
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - CORRECT ANSWERS-True
Hazard prevention and control includes - CORRECT ANSWERS-Implementing
administrative and engineering controls
Pushing carries a greater risk of strain and injury. - CORRECT ANSWERS-False
used due to their power source. - CORRECT ANSWERS-False
Which of the following is not a correct general precaution that should be followed by all
power tool users? - CORRECT ANSWERS-Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - CORRECT
ANSWERS-True
What is the main danger associated with pneumatic tools? - CORRECT ANSWERS-
Getting hit by tool's attachment or fastener
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - CORRECT ANSWERS-True
What requirements are necessary to protect an electric tool user from shock? -
CORRECT ANSWERS-Both A and B
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
be equipped with guards above and below the base plate or shoe - CORRECT
ANSWERS-False
An important safety precaution to remember when operating powder-actuated tool is: -
CORRECT ANSWERS-Inspect it before use and determine that it is clean and that all
moving parts operate freely
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - CORRECT ANSWERS-False
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - CORRECT ANSWERS-Employers
What does MSD stand for? - CORRECT ANSWERS-musculoskeletal disorders
You should change your working position frequently by: - CORRECT ANSWERS-All of
the above
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - CORRECT ANSWERS-True
Hazard prevention and control includes - CORRECT ANSWERS-Implementing
administrative and engineering controls
Pushing carries a greater risk of strain and injury. - CORRECT ANSWERS-False
