MOD, 1. BASIC SAFETY REVIEW SHEET
QUESTIONS AND ANSWERS 100% PASS
A measure of the probability, consequences, and exposure related to an event is referred
to as _____? - ✔✔risk
The D-ring or support point on a safety harness should be placed _____. - ✔✔between
your shoulder blades
When performing overhead work on scaffolding, what protective measures must be
taken to prevent falling objects from striking a person below? - ✔✔Toeboards, debris
nets, or canopies
CFR 1926 protects a worker's rights by requiring employers to maintain _____ for 30
years after they leave the job. - ✔✔medical records
One aspect of the mission of OSHA is to _____. - ✔✔protect the health of Americans
while at their jobs
The major goal of good housekeeping at a work site is to _____. - ✔✔prevent accidents
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, When gas welding or burning, welders are required to wear tinted goggles or welding
hoods with a filter lens of not less than a _____ shade. - ✔✔no. 4
When stepping off a ladder onto a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _____. - ✔✔3
feet
Which of the following data is included on a material safety data sheet for a hazardous
shipment? - ✔✔How to contact the manufacturer of the substance
A person who is capable of identifying existing and predictable hazards and has
authorization to take prompt corrective measures to eliminate such hazards is a _____
person. - ✔✔competent
What is the best way to protect yourself when working near moving vehicles and
equipment? - ✔✔Wear a reflective or high-visibility vest.
If you are backing a vehicle and your rear vision is blocked, you should _____. - ✔✔use
a signaler to direct you
The highest safe standing level on an extension ladder is the _____ rung from the top. -
✔✔fourth
Your personal fall arrest system should be inspected monthly by a(n) _____. -
✔✔competent person
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
QUESTIONS AND ANSWERS 100% PASS
A measure of the probability, consequences, and exposure related to an event is referred
to as _____? - ✔✔risk
The D-ring or support point on a safety harness should be placed _____. - ✔✔between
your shoulder blades
When performing overhead work on scaffolding, what protective measures must be
taken to prevent falling objects from striking a person below? - ✔✔Toeboards, debris
nets, or canopies
CFR 1926 protects a worker's rights by requiring employers to maintain _____ for 30
years after they leave the job. - ✔✔medical records
One aspect of the mission of OSHA is to _____. - ✔✔protect the health of Americans
while at their jobs
The major goal of good housekeeping at a work site is to _____. - ✔✔prevent accidents
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, When gas welding or burning, welders are required to wear tinted goggles or welding
hoods with a filter lens of not less than a _____ shade. - ✔✔no. 4
When stepping off a ladder onto a platform or roof, the top of the ladder should extend
above the point where the ladder touches the platform or roof by at least _____. - ✔✔3
feet
Which of the following data is included on a material safety data sheet for a hazardous
shipment? - ✔✔How to contact the manufacturer of the substance
A person who is capable of identifying existing and predictable hazards and has
authorization to take prompt corrective measures to eliminate such hazards is a _____
person. - ✔✔competent
What is the best way to protect yourself when working near moving vehicles and
equipment? - ✔✔Wear a reflective or high-visibility vest.
If you are backing a vehicle and your rear vision is blocked, you should _____. - ✔✔use
a signaler to direct you
The highest safe standing level on an extension ladder is the _____ rung from the top. -
✔✔fourth
Your personal fall arrest system should be inspected monthly by a(n) _____. -
✔✔competent person
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
